Performance of ZnMn2O4/SiO2 sorbent for high temperature H2S removal from hot coal gas. Issue 57 (19th July 2017)

• Record Type: Journal Article
• Authors: Ko, Tzu-Hsing; Wang, Shumao; Chang, Feng-Hsiang; Chu, Chen-Yao
• Is Part Of: RSC advances. Volume 7:Issue 57(2017)
• Page Start: 35795
• Page End: 35804
• Publication Date: 2017-07-19
• Subjects: Chemistry -- Periodicals; 540.5
• DOI: 10.1039/c7ra06785b
• Languages: English
• ISSNs: 2046-2069

Abstract

Abstract : A spinel ZnMn2 O4 sorbent supported on SiO2 was fabricated using a wet impregnation method for high temperature desulfurization. Abstract : A spinel ZnMn2 O4 sorbent supported on SiO2 was fabricated using a wetness impregnation method for high temperature desulfurization. The operating parameters including operating temperature, ZnMn2 O4 content, space velocity, gas composition, and multiple desulfurization/regeneration cycles were evaluated to understand the optimal condition. The ZnMn2 O4 /SiO2 sorbent exhibits better desulfurization performance when operating temperature is controlled above 600 °C and the suitable space velocity is between 5000–15 000 h −1 . The relationship among CO, H2, and CO2 on sorbent utilization could be explained via the water shift reaction. The sorbent utilization of the ZnMn2 O4 /SiO2 sorbent was retained at approximately 70% after ten desulfurization/regeneration cycles. Elemental analyses demonstrated that the formation of the spinel structure of ZnMn2 O4 /SiO2 improved the Zn stability and no Zn vaporization or loss were observed after ten desulfurization/regeneration cycles. X-ray diffraction (XRD) and temperature programmed regeneration (TPR) were used to characterize the crystal phase and regeneration phenomena of the ZnMn2 O4 /SiO2 sorbent. XRD results demonstrated the presence of spinel structure of ZnMn2 O4, and no Zn and Mn oxides were observed after multiple cycles, indicating that the ZnMn2 O4 /SiO2 sorbent is thermodynamically stable for high temperature desulfurization. Through the EDS and TPR analyses, the residual sulfur was found in the regenerated sorbent and this sulfur species is sulfate from incomplete regeneration. A regeneration temperature of 700 °C was the best choice to overcome the formation of metal sulfate.