Axially equilibrated displacement‐based beam element for simulating the cyclic inelastic behaviour of RC members. (1st February 2017)

• Record Type: Journal Article
• Authors: Tarquini, Danilo; Almeida, João P.; Beyer, Katrin
• Is Part Of: Earthquake engineering and structural dynamics. Volume 46:Number 9(2017)
• Page Start: 1471
• Page End: 1492
• Publication Date: 2017-02-01
• Subjects: beam element -- axial equilibrium -- displacement‐based formulation -- distributed plasticity -- tension shift effects; Structural dynamics -- Periodicals; Earthquake engineering -- Periodicals; 624.1762
• DOI: 10.1002/eqe.2865
• Languages: English
• ISSNs: 0098-8847

Abstract

Summary: Distributed plasticity beam elements are commonly used to evaluate limit state demands for performance‐based analysis of reinforced concrete (RC) structures. Strain limits are often preferred to drift limits because they directly relate to damage and are therefore less dependent on member geometry and boundary conditions. However, predicting accurately strain demands still represents a major simulation challenge. Tension shift effects, which induce a linear curvature profile in the plastic hinge region of RC columns and walls, are one of the main causes for the mismatch between experimental and numerical estimates of local level quantities obtained through force‐based formulations. Classical displacement‐based approaches are instead suitable to simulate such linear curvature profile. Unfortunately, they verify equilibrium only on an average sense due to the wrong assumption on the axial displacement field, leading to poor deformation and force predictions. This paper presents a displacement‐based element in which axial equilibrium is strictly verified along the element length. The assumed transversal displacement field ensures a linear curvature profile, connecting accurately global displacement and local strain demands. The proposed finite element is validated against two sets of quasi‐static cyclic tests on RC bridge piers and walls. The results show that curvature and strain profiles for increasing ductility demands are significantly improved when axially equilibrated rather than classical displacement‐based or force‐based elements are used to model the structural members. Copyright © 2017 John Wiley & Sons, Ltd.