Improved filling condition to reduce casting inclusions using the submerged gate method. (June 2017)

• Record Type: Journal Article
• Authors: Wang, Tingli; Yao, Shan; Tong, Qiang; Sui, Longfei
• Is Part Of: Journal of manufacturing processes. Volume 27(2017)
• Page Start: 108
• Page End: 113
• Publication Date: 2017-06
• Subjects: Submerged -- Gate -- Casting -- Filling -- Inclusion; Production management -- Data processing -- Periodicals; Manufacturing processes -- Periodicals; Procestechnologie; Productietechniek; Production -- Gestion -- Informatique -- Périodiques; Fabrication -- Périodiques; Manufacturing processes; Production management -- Data processing; Periodicals; 670.5
• DOI: 10.1016/j.jmapro.2017.01.013
• Languages: English
• ISSNs: 1526-6125

Abstract

Abstract: The submerged gate filling processes were investigated through the use of particle image velocimetry (PIV) measurements, numerical simulation and castings production. The results showed that the submerged gate filling can improve the mold filling conditions, which may reduce the occurrence of inclusion defects during casting production. The liquid free surface in the mold rose slowly and smoothly during the filling process, which could reduce the occurrence of oxide film inclusion defects. The flow velocity decreased from the gate to the mold, which may reduce the severity of the liquid impingement that causes sand wash defects. The liquid flow inside the mold, with the exception of the flow path region, was primarily quiescent and the distance from the submerged gate to the free surface was relatively small. Therefore, low density slag in the liquid could be carried to the liquid free surface by the fluid flow and by the slag's buoyancy.