Life cycle assessment of sustainable raw material acquisition for functional magnetite bionanoparticle production. (1st September 2017)

• Record Type: Journal Article
• Authors: Sadhukhan, Jhuma; Joshi, Nimisha; Shemfe, Mobolaji; Lloyd, Jonathan R.
• Is Part Of: Journal of environmental management. Volume 199(2017)
• Page Start: 116
• Page End: 125
• Publication Date: 2017-09-01
• Subjects: Fe(III)-reduction -- Wastewater remediation -- Environmental impact assessment -- Monte Carlo simulation -- Resource recovery -- Microbial biotechnology; Environmental policy -- Periodicals; Environmental management -- Periodicals; Environment -- Periodicals; Ecology -- Periodicals; 363.705
• DOI: 10.1016/j.jenvman.2017.05.048
• Languages: English
• ISSNs: 0301-4797

Abstract

Abstract: Magnetite nanoparticles (MNPs) have several applications, including use in medical diagnostics, renewable energy production and waste remediation. However, the processes for MNP production from analytical-grade materials are resource intensive and can be environmentally damaging. This work for the first time examines the life cycle assessment (LCA) of four MNP production cases: (i) industrial MNP production system; (ii) a state-of-the-art MNP biosynthesis system; (iii) an optimal MNP biosynthesis system and (iv) an MNP biosynthesis system using raw materials sourced from wastewaters, in order to recommend a sustainable raw material acquisition pathway for MNP synthesis. The industrial production system was used as a benchmark to compare the LCA performances of the bio-based systems (cases ii-iv). A combination of appropriate life cycle impact assessment methods was employed to analyse environmental costs and benefits of the systems comprehensively. The LCA results revealed that the state-of-the-art MNP biosynthesis system, which utilises analytical grade ferric chloride and sodium hydroxide as raw materials, generated environmental costs rather than benefits compared to the industrial MNP production system. Nevertheless, decreases in environmental impacts by six-fold were achieved by reducing sodium hydroxide input from 11.28 to 1.55 in a mass ratio to MNPs and replacing ferric chloride with ferric sulphate (3.02 and 2.59, respectively, in a mass ratio to MNPs) in the optimal biosynthesis system. Thus, the potential adverse environmental impacts of MNP production via the biosynthesis system can be reduced by minimising sodium hydroxide and substituting ferric sulphate for ferric chloride. Moreover, considerable environmental benefits were exhibited in case (iv), where Fe(III) ions were sourced from metal-containing wastewaters and reduced to MNPs by electrons harvested from organic substrates. It was revealed that 14.4 kJ and 3.9 kJ of primary fossil resource savings could be achieved per g MNP and associated electricity recoveries from wastewaters, respectively. The significant environmental benefits exhibited by the wastewater-fed MNP biosynthesis system shows promise for the sustainable production of MNPs. Highlights: 32–57 nm crystalline magnetite nanoparticle obtained using microbial synthesis route. Fe(III)-reducing bacteria Geobacter sulfurreducens or Shewanella oneidensis catalyse nanoparticle production. Analytical-grade sodium hydroxide/iron salt solutions potentially replaced by waste substrates as starting material. Industrial MNP synthesis costs 14.4 MJ/kg fossil energy. MNP recovered from wastewaters gives a net fossil energy saving by 18.3 MJ/kg.