Shear and mode II fracture of PUR foams. (December 2015)

• Record Type: Journal Article
• Authors: Marsavina, Liviu; Constantinescu, Dan M.; Linul, Emanoil; Voiconi, Tudor; Apostol, Dragos A.
• Is Part Of: Engineering failure analysis. Volume 58:Part 2(2015:Dec.)
• Page Start: 465
• Page End: 476
• Publication Date: 2015-12
• Subjects: Polyurethane foams -- Fracture criteria -- Fracture toughness -- Mixed mode loading; System failures (Engineering) -- Periodicals; Fracture mechanics -- Periodicals; Reliability (Engineering) -- Periodicals; Pannes -- Périodiques; Rupture, Mécanique de la -- Périodiques; Fiabilité -- Périodiques; Fracture mechanics; Reliability (Engineering); System failures (Engineering); Periodicals; Electronic journals; 620.112
• DOI: 10.1016/j.engfailanal.2015.05.021
• Languages: English
• ISSNs: 1350-6307

Abstract

Highlights: Three densities of PUR foams were investigated for shear and mode II fracture. Impulse Excitation Technique and Digital Image Correlation were applied to determine the Shear Modulus of PUR foams. Iosipescu shear stress was used for shear strength determination of PUR foams. Three types of specimens were used for determining mode I and mode II fracture toughness of PUR foams. Abstract: Polyurethane (PUR) foam materials are widely used as cores in sandwich composites, for packing and cushioning. They are made of interconnected networks of solid struts and cell walls incorporating voids with entrapped gas. The main characteristics of foams are lightweight, high porosity, high crushability, and good energy absorption capacity. Fracture toughness in mixed mode loading is of particular interest because foam cracking weakens the structure's capacity for carrying loads. Present paper assesses the shear elastic (shear modulus) and mechanical (shear strength) properties of polyurethane foams. Also, three different types of specimens were used to determine mode I and mode II fracture toughness. The shear modulus, shear strength and fracture toughness increases with increasing foam density. Also the effect of loading direction and loading speed is investigated. The authors propose a micromechanical model to estimate fracture toughness based on the tensile strength of the solid material and the topology of the cellular structure.