A five-axis geometric errors calibration model based on the common perpendicular line (CPL) transformation using the product of exponentials (POE) formula. (August 2017)

• Record Type: Journal Article
• Authors: Qiao, Yu; Chen, Youping; Yang, Jixiang; Chen, Bing
• Is Part Of: International journal of machine tools & manufacture. Volume 118/119(2017)
• Page Start: 49
• Page End: 60
• Publication Date: 2017-08
• Subjects: Five-axis -- Geometric error -- Product of exponentials formula -- Kinematics -- CNC; Machine-tools -- Periodicals; Manufacturing processes -- Periodicals; Machines-outils -- Périodiques; Fabrication -- Périodiques; Electronic journals; 621.902
• DOI: 10.1016/j.ijmachtools.2017.04.003
• Languages: English
• ISSNs: 0890-6955

Abstract

Abstract: Geometric error calibration is a key procedure to improve machining accuracy of five-axis CNC machine tools. This paper proposes a new position independent geometric errors (PIGEs) calibration model of five-axis serial machine tools based on the product of exponentials (POE) formula. The proposed model is characterized by the common perpendicular line (CPL) transformation which is adopted to express the deviation between the nominal axis twist and the actual one. One major advantage of the proposed model is the axis twists in the proposed calibration procedure with CPL model strictly fit the constraints of the revolute axis and prismatic axis, thus the calibration procedure avoids the normalization and orthogonalization as required by existing calibration models based on POE formula. The other advantage of the proposed CPL model is that it only needs 4 independent parameters for PIGEs of a revolute axis and 2 for PIGEs of a prismatic axis, rather than 6 parameters for each axis as required by existing models. Apparently, the decrease of parameters brings a shrink to the scale of the identification coefficient matrix, and thus decreases the calculation amount. The proposed model is validated by simulations and experiments. Highlights: A calibration model is proposed based on common perpendicular line transformation. The calibration model avoids twist normalization and orthogonalization. The model only needs 4 parameters for a rotary axis and 2 for a translational axis. The proposed calibration model is verified by experiments with ball-bar tests.