Adsorption of Cd(II) and Pb(II) by in situ oxidized Fe3O4 membrane grafted on 316L porous stainless steel filter tube and its potential application for drinking water treatment. (1st July 2017)

• Record Type: Journal Article
• Authors: Zhu, Mengfei; Zhu, Li; Wang, Jianlong; Yue, Tianli; Li, Ronghua; Li, Zhonghong
• Is Part Of: Journal of environmental management. Volume 196(2017)
• Page Start: 127
• Page End: 136
• Publication Date: 2017-07-01
• Subjects: Membrane separation -- Inorganic membrane -- Heavy metal -- Adsorption -- Competitive adsorption -- Adsorption mechanism; Environmental policy -- Periodicals; Environmental management -- Periodicals; Environment -- Periodicals; Ecology -- Periodicals; 363.705
• DOI: 10.1016/j.jenvman.2017.02.073
• Languages: English
• ISSNs: 0301-4797

Abstract

Abstract: Removing heavy metal ions from aqueous solutions is one of the most challenging separations. In situ oxidized Fe3 O4 membranes using 316L porous stainless steel filter tube have shown great potential for removing anion Cr(VI). Here we report the performances of the in situ oxidized Fe3 O4 membranes for removing two toxic cations Cd(II) and Pb(II) commonly existing in water and their potential applications for drinking water purification. The membranes exhibited high removal efficiency: 97% at pH 9.0 for Cd(II) of 1.0 mg/L initial concentration and 100% at pH 5.0–6.0 for Pb(II) of 5.0 mg/L initial concentration. The maximum adsorption capabilities were estimated at 0.800 mg/g and 2.251 mg/g respectively for Cd(II) and Pb(II) at 318 K by the Langmuir model. Results of batch tests revealed the existence of electrostatic attraction and chemisorption. XRD and FT-IR analyses indicated that the chemisorption might be the insertion of Cd(II) and Pb(II) into the Fe3 O4 crystal faces of 311 and 511 to form mononuclear or binuclear coordination with O atoms of Fe-O6 groups. Competitive adsorption of Cd(II) and Pb(II) in binary solutions revealed a preferential adsorption for Pb(II). Na2 EDTA solution was used to regenerate the membranes, and the maximum desorption ratio was 90.29% and 99.75% respectively for Cd(II) and Pb(II). The membranes were able to efficiently lower Cd(II) and Pb(II) concentrations to meet the drinking water standards recommended by the World Health Organization and are promising for engineering applications aimed at drinking water purification. Highlights: High removal efficiencies of 97% for Cd(II) and 100% for Pb(II). Adsorptions for Cd(II) were highly pH dependent. The adsorption is a physical process enhanced by chemical effect. The octahedral Fe-O6 groups are responsible for the chemisorption. The membrane shows promise for engineering applications for drinking water purification.