Validation of a new model for the sizing of denitrification reactors, by testing full-scale plants. Issue 11 (3rd June 2017)

• Record Type: Journal Article
• Authors: Raboni, M.; Torretta, V.
• Is Part Of: Environmental technology. Volume 38:Issue 11(2017)
• Page Start: 1376
• Page End: 1382
• Publication Date: 2017-06-03
• Subjects: Activated sludge -- biological processes -- denitrification -- modelling -- nitrogen removal; Environmental engineering -- Periodicals; Environmental protection -- Periodicals; 628.05
• DOI: 10.1080/09593330.2016.1228700
• Languages: English
• ISSNs: 0959-3330

Abstract

ABSTRACT: A new deterministic model for the calculation of the specific denitrification rate (SDNR), useful for the design of pre-denitrification reactors, was tested on eight full-scale activated sludge plants. The model represents the SDNR at 20°C (SDNR20°C ) as a function of the sludge loading in the denitrification reactor (F:MDEN ) and the residual dissolved oxygen in the denitrification reactor (DODEN ). The results proved the ability of the model in calculating the SDNR20°C . The model shows a lower degree of adaptability for small-sized plants. SDNR20°C proved to have a strong sensitivity to DODEN, mainly in correspondence with low DO concentrations (less than 2 mg L −1 ). The sensitivity decreases at greater DO values, but with a progressively less marked gradient, up to becoming weak only at DO concentrations greater than 0.4-0.5 mg L −1, which are rarely found in full-scale plants. DO concentrations measured in real-scale facilities are mostly in the range 0.2-0.4 mg L −1 . These concentrations cause adverse effects on the kinetics of nitrogen removal, and consequently on the denitrification performance. Thus, minimizing DO in the pre-denitrification reactor is relevant. The sensitivity of SDNR20°C to F:MDEN was less important, as it is characterized by a growing linear behaviour with a low slope.