Hydrogen storage properties of 2Mg-Fe mixtures processed by hot extrusion at different temperatures. (20th April 2017)

• Record Type: Journal Article
• Authors: de Lima Andreani, G.F.; Miglioli, M.M.; Triques, M.R.M.; Roche, V.; Kiminami, C.S.; Botta, W.J.; Jorge, A.M.
• Is Part Of: International journal of hydrogen energy. Volume 42:Number 16(2017)
• Page Start: 11493
• Page End: 11500
• Publication Date: 2017-04-20
• Subjects: Hydrogen storage -- 2Mg-Fe -- Mechanical alloying -- Hot extrusion; Hydrogen as fuel -- Periodicals; Hydrogène (Combustible) -- Périodiques; Hydrogen as fuel; Periodicals; 665.81
• DOI: 10.1016/j.ijhydene.2017.02.213
• Languages: English
• ISSNs: 0360-3199

Abstract

Abstract: 2Mg-Fe mixtures produced by high-energy ball milling were consolidated into bulk form by hot extrusion at different processing temperatures (573 K (300 °C), 623 K (350 °C) and 673 K (400 °C)), aiming to evaluate their influence on the structure and microstructure of bulk materials and their consequent influence on the hydrogen sorption properties. In spite being in the nanosize range, the highest the processing temperature, the larger the grain sizes. However, the nanometric grain size remained after any hot extrusion condition, as estimated by Rietveld refinement. The pinning effect of Fe on Mg grain boundaries explained this effect. In the first absorption (activation), powders showed a hydrogen storage capacity of ∼4.53 wt%, while the extruded samples (bulk materials) reached almost the same capacity during the period of hydrogenation (∼94% of the maximum hydrogen storage capacity for Mg2 FeH6 - 5.5 wt%). The smallest crystallite sizes and highest surface area for hydrogenation explain the good performance of powders. However, when comparing only extruded samples, it was observed that the highest capacity and the lowest incubation times were mainly related to grain sizes and to the favorable texture along (002) plane of αMg. The desorption temperature of bulk materials was very similar to that of powders, which is good considering the lower surface area of bulk materials. Highlights: Powders of 2Mg-Fe composites were produced by high energy ball milling. Powders of 2Mg-Fe mixtures were consolidated into bulk composites by hot extrusion. All samples formed Mg2 FeH6 after hydrogenation. Grain size and favorable texture governed H2 -storage capacity and incubation times. Desorption temperatures of bulk composites was very similar to that of powders.