The role of fouling in optimizing direct-flow filtration module design. (18th May 2017)

• Record Type: Journal Article
• Authors: Wang, Mylène; Mondal, Sourav; Griffiths, Ian M.
• Is Part Of: Chemical engineering science. Volume 163(2017)
• Page Start: 215
• Page End: 222
• Publication Date: 2017-05-18
• Subjects: Membrane -- Filtration -- Fouling -- Hollow fiber -- Module design; Chemical engineering -- Periodicals; Génie chimique -- Périodiques; Chemical engineering; Periodicals; Electronic journals; 660
• DOI: 10.1016/j.ces.2017.01.043
• Languages: English
• ISSNs: 0009-2509

Abstract

Highlights: A direct-flow filter comprises a series of hollow fibers packed into a single device. The transmembrane pressure distribution in each fiber affects the filter performance. The pressure evolves with time due to pore clogging by contaminants. We evaluate the optimum inter-fiber spacing that maximizes the fluid processed. Significant improvements can be made through careful choice in the fiber spacing. Abstract: The local transmembrane pressure (TMP) distribution plays a crucial role in the performance of hollow-fiber microfiltration and ultrafiltration membrane devices. A direct-flow filter comprises an array of hollow fibers encased within a single module. The TMP in each hollow fiber is dependent on the spacing between neighboring fibers, and evolves with time due to pore clogging by contaminants (fouling). We consider an idealized set-up in which the fibers are undeformable and equally spaced within the device, and study the impact of the pore-blocking phenomena on the TMP during the filtration process. The model is used to evaluate the optimum inter-fiber spacing that maximizes the fluid processed either after a prescribed time or before the filter blocks and its dependence on the membrane permeability and the fouling rate. We show that significant improvements can be made on the operating efficiency of a direct-flow device through careful choice in the fiber spacing during fabrication.