Grafting of polyethylenimine onto cellulose nanofibers for interfacial enhancement in their epoxy nanocomposites. (10th February 2017) - Zhao, Jiangqi
Highlights: CNFs-PEI was synthesized as both a reinforcing filler and a curing agent for epoxy. CNFs-PEI increased the crosslinking density and strengthened the interface. The mechanical properties of the nanocomposites were greatly improved. Incorporation of CNFs-PEI remarkably reduced the CTE of the epoxy nanocomposites. The thermal conductivity of the nanocomposites was observed to increase. Abstract: Cellulose nanofibers (CNFs) were surface-modified with polyethyleneimine (PEI), which brought plentiful amine groups on the surface of CNFs, leading to a reduced hydrogen bond density between CNFs and consequently less CNFs agglomerates. The amine groups could also react with the epoxy as an effective curing agent that could increase the interfacial crosslinking density and strengthen interfacial adhesion. The tensile strength and Young's modulus of CNFs-PEI/Epoxy nanocomposites were 88.1% and 237.6% higher than those of neat epoxy, respectively. The tensile storage modulus of the nanocomposites also increased significantly at the temperature either below or above the Tg. The coefficient of thermal expansion for the CNFs-PEI/Epoxy nanocomposites was 22.2 ppm K −1, much lower than that of the neat epoxy (88.6 ppm K −1 ). In addition, the thermal conductivity of the nanocomposites was observed to increase as well. The exceptional and balanced properties may provide the nanocomposites promising applications in automotive, construction and electronic devices.