Polarity and ion recombination corrections in continuous and pulsed beams for ionization chambers with high Z chamber walls. (March 2017)

• Record Type: Journal Article
• Authors: Aldosary, Ghada; Safigholi, Habib; Song, William; Seuntjens, Jan; Sarfehnia, Arman
• Is Part Of: Physica medica. Volume 35(2017)
• Page Start: 102
• Page End: 109
• Publication Date: 2017-03
• Subjects: Ionization chamber walls -- Polarity and ion recombination corrections -- Jaffé plots -- Energy dependence; Medical physics -- Periodicals; Biophysics -- Periodicals; Biophysics -- Periodicals; Imagerie médicale -- Périodiques; Radiothérapie -- Périodiques; Rayons X -- Sécurité -- Mesures -- Périodiques; Physique -- Périodiques; Médecine -- Périodiques; 610.153
• DOI: 10.1016/j.ejmp.2017.01.019
• Languages: English
• ISSNs: 1120-1797

Abstract

Highlights: Response of Farmer-type ionization chambers with high Z walls is studied. Polarity correction factor is not significantly affected by chamber wall material. Saturation charges greatly vary with different chamber wall materials. Saturation curve behavior is similar to that reported for conventional chambers. Abstract: In this work, the response of Farmer-type ionization chambers fitted with high atomic number (Z) walls is studied, and results of the effects of such walls on polarity and ion recombination correction factors in both continuous and pulsed beams are presented. Measurements were made in a continuous Co-60 beam and a pulsed 6 MV linac beam using an Exradin-A12 ionization chamber fitted with the manufacturer's C-552 plastic wall, as well as geometrically identical walls made from aluminum, copper and molybdenum. The bias voltage was changed between 10 values (range: +50 to +560 V). Ion recombination was determined from Jaffé plots and by using the "two-voltage technique". The saturation charge measured with each chamber wall was extrapolated from Jaffé plots. Additionally, the effect of different wall materials on chamber response was studied using MCNP simulations. Results showed that the polarity correction factor is not significantly affected by changes in chamber wall material (within 0.1%). Furthermore, although the saturation charges greatly vary with each chamber wall material, and charge multiplication increases for higher atomic number wall materials, the standard methods of calculating ion recombination yielded results that differed by only 0.2%. Therefore, polarity and ion recombination correction factors are not greatly affected by the chamber wall material. The experimental saturation charges for all the different wall materials agreed well within the uncertainty with MCNP simulations. The breakdown of the linear relationship in Jaffé plots that was previously reported to exist for conventional chamber walls was also observed with the different wall materials.