Vanadium Microalloyed 0.25 C Cast Steels Showing As‐Forged Levels of Strength and Ductility. Issue 3 (29th July 2016)

• Record Type: Journal Article
• Authors: Kostryzhev, Andrii G.; Morales‐Cruz, Erick U.; Zuno‐Silva, Jorge; Cardoso‐Legorreta, Edgar; Ruiz‐Lopez, Ismael; Pereloma, Elena V.
• Is Part Of: Steel research international. Volume 88:Issue 3(2017)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2016-07-29
• Subjects: vanadium -- microalloyed steel -- casting -- microstructural characterization -- mechanical properties; Steel -- Periodicals; Steel -- Metallurgy -- Periodicals; 669.142
• DOI: 10.1002/srin.201600166
• Languages: English
• ISSNs: 1611-3683

Abstract

Abstract : Application of cast steels instead of hot forged or rolled ones will significantly decrease manufacturing costs and the final product price. However, low levels of mechanical properties in cast steels, especially ductility, can slow down the substitution of forged and rolled steels with the cast. In the present work, the authors study the effect of 0.01–0.12 wt% vanadium additions on the microstructure and mechanical properties of 0.25 wt% C cast steels. The yield stress, ultimate tensile strength, and elongation to failure in the studied cast steels are 730–750 MPa, 955–1002 MPa, and 12.3–21.5%, respectively, which correspond to those in hot forged and rolled steels with similar compositions. So, high property values in the 0.25 wt% C cast steels are shown here for the first time. The simultaneous increase in strength and ductility with an increase in V content follow a decrease in pearlite fraction, interlamellar spacing, and average pearlite area size; an increase in amount of degenerated pearlite; an increase in V‐rich particle volume fraction and number density in ferrite and pearlite; the occurrence of interphase precipitation (in 0.12 wt% V steel), and an increase in dislocation density in ferrite and pearlite. Abstract : In 0.25 wt% carbon cast steels with ferrite–pearlite microstructures both strength and ductility increase with vanadium additions. Microalloying with 0.04–0.12 wt% V results in 730–750 MPa of yield stress, 955–1000 MPa of ultimate tensile strength, and 12.3–21.5% of elongation to failure, which correspond to the values observed in hot forged and thermo‐mechanically processed steels with similar compositions.