Response surface methodology as a powerful tool to optimize the synthesis of polymer-based graphene oxide nanocomposites for simultaneous removal of cationic and anionic heavy metal contaminants. Issue 30 (28th March 2017)

• Record Type: Journal Article
• Authors: Perez, Jem Valerie D.; Nadres, Enrico T.; Nguyen, Hang Ngoc; Dalida, Maria Lourdes P.; Rodrigues, Debora F.
• Is Part Of: RSC advances. Volume 7:Issue 30(2017)
• Page Start: 18480
• Page End: 18490
• Publication Date: 2017-03-28
• Subjects: Chemistry -- Periodicals; 540.5
• DOI: 10.1039/c7ra00750g
• Languages: English
• ISSNs: 2046-2069

Abstract

Abstract : Nanocomposites containing graphene oxide (GO), polyethyleneimine (PEI), and chitosan (CS) were synthesized for chromium(vi ) and copper(ii ) removal from water. Abstract : Nanocomposites containing graphene oxide (GO), polyethyleneimine (PEI), and chitosan (CS) were synthesized for chromium(vi ) and copper(ii ) removal from water. Response surface methodology (RSM) was used for the optimization of the synthesis of the CS–PEI–GO beads to achieve simultaneous maximum Cr(vi ) and Cu(ii ) removals. The RSM experimental design involved investigating different concentrations of PEI (1.0–2.0%), GO (500–1500 ppm), and glutaraldehyde (GLA) (0.5–2.5%), simultaneously. Batch adsorption experiments were performed to obtain responses in terms of percent removal for both Cr(vi ) and Cu(ii ) ions. A second-order polynomial equation was used to model the relationship between the synthesis conditions and the adsorption responses. High R 2 values of 0.9848 and 0.8327 for Cr(vi ) and Cu(ii ) removal, respectively, were obtained from the regression analyses, suggesting good correlation between observed experimental values and predicted values by the model. The optimum bead composition contained 2.0% PEI, 1500 ppm GO, and 2.08% GLA, and allowed Cr(vi ) and Cu(ii ) removals of up to 91.10% and 78.18%, respectively. Finally, characterization of the structure and surface properties of the optimized CS–PEI–GO beads was carried out using X-ray diffraction (XRD), porosity and BET surface area analysis, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), which showed favorable adsorbent characteristics as given by a mesoporous structure with high surface area (358 m 2 g −1 ) and plenty of surface functional groups. Overall, the synthesized CS–PEI–GO beads were proven to be effective in removing both cationic and anionic heavy metal pollutants.