Experimental studies on mixed‐mode dynamic fracture behaviour of aluminium alloy plates with narrow U‐notch. Issue 11 (4th April 2016)

• Record Type: Journal Article
• Authors: Wen, X; Lu, F; Chen, R; Cao, L; Lin, Y
• Is Part Of: Fatigue & fracture of engineering materials & structures. Volume 39:Issue 11(2016:Nov.)
• Page Start: 1379
• Page End: 1390
• Publication Date: 2016-04-04
• Subjects: aluminium alloy -- narrow U‐notch -- crack initiation -- dynamic fracture -- mixed‐mode; Materials -- Fatigue -- Periodicals; Fracture mechanics -- Periodicals; 620.1123
• DOI: 10.1111/ffe.12455
• Languages: English
• ISSNs: 8756-758X

Abstract

Abstract: Mixed‐mode dynamic fracture behaviour of cast aluminium alloy ZL205A thin plates with narrow U‐notch was studied by split Hopkinson tensile bar apparatus. Specimens with different loading angles were designed to realize different fracture modes. The same loading condition was maintained during the tests. Recovery specimens show that crack propagates along the notch direction. Force–elongation relations show that with the loading angle increasing, the fracture force increases while the final elongation decreases. Deformation and fracture process was observed by a high‐speed camera. Displacement distribution around the crack was calculated through digital image correlation technique. Based on the photos and displacement results, initiation time of the crack was derived. Besides, two stress components (normal stress and shear stress) applied on the fracture surface were investigated. Results show that crack initiation stresses at different loading angles satisfy the ellipse equation. Pure mode I and II fracture stresses are 425.3 and 236.7 MPa, respectively. Furthermore, specific fracture energy of different specimens was calculated. The energy data vary with loading angle and located on an approximate upward parabolic curve. From the curve, the minimum specific fracture energy of the thin plate specimen is 42.0 kJ/m 2 under loading angle of 76.3°.