The finite volume method for evaluating the wall temperature profiles of the superheater and reheater tubes in power plant. (5th February 2017)

• Record Type: Journal Article
• Authors: Xu, Hong; Deng, Bo; Jiang, Dongfang; Ni, Yongzhong; Zhang, Naiqiang
• Is Part Of: Applied thermal engineering. Volume 112(2017:Feb.)
• Page Start: 362
• Page End: 370
• Publication Date: 2017-02-05
• Subjects: High temperature surface -- Finite volume method -- Wall temperature profiles -- Power plant; Heat engineering -- Periodicals; Heating -- Equipment and supplies -- Periodicals; Periodicals; 621.40205
• DOI: 10.1016/j.applthermaleng.2016.10.091
• Languages: English
• ISSNs: 1359-4311

Abstract

Highlights: A single tube model is proposed to evaluate the wall temperature profiles. Effect of excessive higher gas temperature and steam temperature. Oxide scales on the inner tube can cause the overheating of the tube wall. Higher mass flow rate will decrease the heat flux from the tube metal to the steam. Abstract: A single tube model based on the finite volume method and measured temperature of inlet and outlet steam is proposed to evaluate the wall temperature profiles of the high temperature surface tubes in power plant. The model permits the consideration of oxide scales in the inner wall, which can leading to the overheating of material. With the increasing of outer oxide scale thickness under the same condition, the temperature of the outer wall will be rapidly increasing more than inner wall. In the same condition without oxide scale, steam is more easily leading to the increased of the wall temperature than flue gas. The higher mass flow rate will increase the convection coefficient and decrease the heat flux from the tube metal to the steam.