A design of ultra-broadband metamaterial absorber. Issue 2 (3rd April 2017) - Shi, Yan
Abstract: In this paper, an ultra-broadband, wide-angle polarization-insensitive metamaterial absorber is designed at microwave frequencies. The absorber consists of a periodic array of metallic strips with the lumped resistances fabricated on a dielectric substrate with a ground plane. The proposed absorber is single-layered and symmetric, thus leading to very thin and polarization-insensitive characteristics. According to the surface current distributions, the proposed absorber can operate three resonant modes including two dipole resonances and an LC resonance. By adjusting the geometry and lumped resistances of the structure, three resonant modes can be effectively connected together, and thus an ultra-broadband response can be realized. The simulated and experimental results demonstrate that the proposed absorber produces a good absorption above 80% at normal incidence and above 60% at oblique incidence with the incident angle smaller than 45° between 6 and 16.2 GHz.