Process development for elemental recovery from PGM tailings by thermochemical treatment: Preliminary major element extraction studies using ammonium sulphate as extracting agent. (April 2016)

• Record Type: Journal Article
• Authors: Mohamed, Sameera; van der Merwe, Elizabet M.; Altermann, Wladyslaw; Doucet, Frédéric J.
• Is Part Of: Waste management. Volume 50(2016)
• Page Start: 334
• Page End: 345
• Publication Date: 2016-04
• Subjects: PGM tailings -- Ammonium sulphate -- Metal recovery and extraction -- Thermochemical treatment -- Solid–solid reaction; Hazardous wastes -- Periodicals; Refuse and refuse disposal -- Periodicals; 363.728
• DOI: 10.1016/j.wasman.2016.02.021
• Languages: English
• ISSNs: 0956-053X

Abstract

Highlights: PGM tailings represent untapped secondary metal and mineral resources. Major elements were extracted from PGM mine tailings. Extraction was achieved via thermochemical treatment followed by aqueous leaching. The process used ammonium sulphate, a low-cost, recyclable chemical agent. Preliminary extraction efficiencies amount to 60% for Al, 80% for Ca and 35% for Fe. Abstract: Mine tailings can represent untapped secondary resources of non-ferrous, ferrous, precious, rare and trace metals. Continuous research is conducted to identify opportunities for the utilisation of these materials. This preliminary study investigated the possibility of extracting major elements from South African tailings associated with the mining of Platinum Group Metals (PGM) at the Two Rivers mine operations. These PGM tailings typically contain four major elements (11% Al2 O3 ; 12% MgO; 22% Fe2 O3 ; 34% Cr2 O3 ), with lesser amounts of SiO2 (18%) and CaO (2%). Extraction was achieved via thermochemical treatment followed by aqueous dissolution, as an alternative to conventional hydrometallurgical processes. The thermochemical treatment step used ammonium sulphate, a widely available, low-cost, recyclable chemical agent. Quantification of the efficiency of the thermochemical process required the development and optimisation of the dissolution technique. Dissolution in water promoted the formation of secondary iron precipitates, which could be prevented by leaching thermochemically-treated tailings in 0.6M HNO3 solution. The best extraction efficiencies were achieved for aluminium (ca. 60%) and calcium (ca. 80%). 35% iron and 32% silicon were also extracted, alongside chromium (27%) and magnesium (25%). Thermochemical treatment using ammonium sulphate may therefore represent a promising technology for extracting valuable elements from PGM tailings, which could be subsequently converted to value-added products. However, it is not element-selective, and major elements were found to compete with the reagent to form water-soluble sulphate–metal species. Further development of this integrated process, which aims at achieving the full potential of utilisation of PGM tailings, is currently underway.