Coupled CFD-DEM simulation of hydrodynamic bridging at constrictions. (September 2016)
- Record Type:
- Journal Article
- Title:
- Coupled CFD-DEM simulation of hydrodynamic bridging at constrictions. (September 2016)
- Main Title:
- Coupled CFD-DEM simulation of hydrodynamic bridging at constrictions
- Authors:
- Mondal, Somnath
Wu, Chu-Hsiang
Sharma, Mukul M. - Abstract:
- Highlights: Coupled CFD-DEM to model jamming of neutral monodisperse particulate suspensions. There exists a critical particle volume concentration ϕ* for spontaneous bridging. ϕ* depends dimensionless outlet size, inlet size and flow geometry. Jamming probability increases with flow velocity and particle-fluid density ratio. Abstract: This paper presents a coupled CFD-DEM approach to simulate the flow of particulate suspensions in the intermediate concentration regime where solid volume concentration is 1% < ϕ < 50%. In particular, hydrodynamic multi-particle bridging during flow through a single constriction in a rectangular channel is studied. It is shown that for neutrally buoyant, monodispersed particulate suspensions, the probability of jamming increases with the particle concentration. There also exists a critical particle concentration ( ϕ *) for spontaneous bridging, which depends on the ratio of pore size to particle size, the flow velocity, the particle-fluid density contrast, and the flow geometry leading to the constriction. The ϕ * has a strong dependence on the outlet-to-particle relative size ( Ro ). For 1.5 ≤ Ro ≤ 2.5, a direct transition from a flowing state to a jammed state was observed. For Ro ≥ 3, the flowing state typically transitioned to a dense state characterized by the accumulation of particles near the constriction before jamming. Increasing the inlet-to-particle relative size ( Rip ) lowers ϕ * by increasing the number of particles arriving atHighlights: Coupled CFD-DEM to model jamming of neutral monodisperse particulate suspensions. There exists a critical particle volume concentration ϕ* for spontaneous bridging. ϕ* depends dimensionless outlet size, inlet size and flow geometry. Jamming probability increases with flow velocity and particle-fluid density ratio. Abstract: This paper presents a coupled CFD-DEM approach to simulate the flow of particulate suspensions in the intermediate concentration regime where solid volume concentration is 1% < ϕ < 50%. In particular, hydrodynamic multi-particle bridging during flow through a single constriction in a rectangular channel is studied. It is shown that for neutrally buoyant, monodispersed particulate suspensions, the probability of jamming increases with the particle concentration. There also exists a critical particle concentration ( ϕ *) for spontaneous bridging, which depends on the ratio of pore size to particle size, the flow velocity, the particle-fluid density contrast, and the flow geometry leading to the constriction. The ϕ * has a strong dependence on the outlet-to-particle relative size ( Ro ). For 1.5 ≤ Ro ≤ 2.5, a direct transition from a flowing state to a jammed state was observed. For Ro ≥ 3, the flowing state typically transitioned to a dense state characterized by the accumulation of particles near the constriction before jamming. Increasing the inlet-to-particle relative size ( Rip ) lowers ϕ * by increasing the number of particles arriving at the constriction simultaneously. The effect of changing Rip is more pronounced at high Ro when the probability of bridging is lower. A high fluid velocity increases particle interactions near the constriction and accelerates the onset of bridging. However, no distinct effect of velocity on ϕ * was observed in this study. A higher particle-to-fluid density ratio ( ρp / ρf ) increases the probability of bridging and leads to a lower ϕ * in a given constriction geometry. The effect saturates at higher ρp / ρf when gravitational forces completely dominate over viscous drag forces. ϕ * is also found to decrease with increasing angle of constriction convergence ( θ ) for θ < 30°, but increases beyond that at θ = 60 ∘ . … (more)
- Is Part Of:
- International journal of multiphase flow. Volume 84(2016)
- Journal:
- International journal of multiphase flow
- Issue:
- Volume 84(2016)
- Issue Display:
- Volume 84, Issue 2016 (2016)
- Year:
- 2016
- Volume:
- 84
- Issue:
- 2016
- Issue Sort Value:
- 2016-0084-2016-0000
- Page Start:
- 245
- Page End:
- 263
- Publication Date:
- 2016-09
- Subjects:
- Particulate flow -- Hydrodynamic bridging -- Jamming -- Constriction -- CFD-DEM
Multiphase flow -- Periodicals
Écoulement polyphasique -- Périodiques
Multiphase flow
Periodicals
620.1064 - Journal URLs:
- http://www.sciencedirect.com/science/journal/03019322 ↗
http://www.elsevier.com/journals ↗ - DOI:
- 10.1016/j.ijmultiphaseflow.2016.05.001 ↗
- Languages:
- English
- ISSNs:
- 0301-9322
- Deposit Type:
- Legaldeposit
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library DSC - 4542.366000
British Library DSC - BLDSS-3PM
British Library HMNTS - ELD Digital store - Ingest File:
- 1023.xml