Kinematic model to control the end-effector of a continuum robot for multi-axis processing. Issue 1 (24th November 2015)

• Record Type: Journal Article
• Authors: Cobos-Guzman, Salvador; Palmer, David; Axinte, Dragos
• Is Part Of: Robotica. Volume 35:Issue 1(2017)
• Page Start: 224
• Page End: 240
• Publication Date: 2015-11-24
• Subjects: Continuous robots, -- Inverse kinematic, -- Kinematics model, -- Jacobian for hyper-redundant systems; Robots -- Periodicals; 629.89205
• DOI: 10.1017/S0263574715000946
• Languages: English
• ISSNs: 0263-5747

Abstract

SUMMARY: This paper presents a novel kinematic approach for controlling the end-effector of a continuum robot for in-situ repair/inspection in restricted and hazardous environments. Forward and inverse kinematic (IK) models have been developed to control the last segment of the continuum robot for performing multi-axis processing tasks using the last six Degrees of Freedom (DoF). The forward kinematics (FK) is proposed using a combination of Euler angle representation and homogeneous matrices. Due to the redundancy of the system, different constraints are proposed to solve the IK for different cases; therefore, the IK model is solved for bending and direction angles between (−π/2 to +π/2) radians. In addition, a novel method to calculate the Jacobian matrix is proposed for this type of hyper-redundant kinematics. The error between the results calculated using the proposed Jacobian algorithm and using the partial derivative equations of the FK map (with respect to linear and angular velocity) is evaluated. The error between the two models is found to be insignificant, thus, the Jacobian is validated as a method of calculating the IK for six DoF.