Nanoscale Hafnium Oxide RRAM Devices Exhibit Pulse Dependent Behavior and Multi-level Resistance Capability. Issue 49 (20th May 2016)

• Record Type: Journal Article
• Authors: Beckmann, Karsten; Holt, Josh; Manem, Harika; Van Nostrand, Joseph; Cady, Nathaniel C.
• Is Part Of: MRS advances. Volume 1:Issue 49(2016)
• Page Start: 3355
• Page End: 3360
• Publication Date: 2016-05-20
• Subjects: Hf, -- memory, -- nanoscale; Electrical engineering -- Congresses; Physics -- Congresses; Materials -- Research -- Congresses; Materials science -- Congresses; 620.11
• DOI: 10.1557/adv.2016.377
• Languages: English
• ISSNs: 2059-8521

Abstract

ABSTRACT: Resistive Random Access Memory (RRAM) is a novel form of non-volatile memory that is expected to play a major role in future computing and memory solutions. It has been shown that the resistance of RRAM devices can be precisely tuned by modulating switching voltages, by limiting peak current, and by adjusting the switching pulse duration. This enables the realization of novel applications such as memristive neuromorphic computing and neural network computing. The RRAM devices described in this work utilize an inert tungsten bottom electrode, hafnium oxide based active switching layer, a titanium oxygen exchange layer, and an inert titanium nitride top electrode. Linear sweep and controlled pulse (down to 10 ns) based electrical characterization of RRAM devices was performed in a 1 transistor 1 RRAM (1T1R) configuration to determine endurance, reliability, retention and threshold voltage parameters. We demonstrated endurance values above 10 8 cycles with an average on/off ratio of 15 and pulse voltages for set/reset operation of ±1.5V. The on-chip 1T1R structures show an excellent controllability with respect to the low and high resistive state by manipulating the peak current from 75 up to 350µA we were able to achieve 10 discrete resistive states. Our results demonstrate that the set operation (which shifts the RRAM device from the high to the low resistance state) is only dependent on the voltage of the switching pulse and the peak current limit. The reset operation, however, occurs in an analog fashion and appears to be dependent on the total energy of the applied switching pulse. Pulse energy was modulated by varying the peak voltage which resulted in a larger relative change of the RRAM device resistance.