Effect of pre-corrosion and corrosion/fatigue alternation frequency on the fatigue life of 7B04-T6 aluminum alloy. Issue 24 (5th December 2016)

• Record Type: Journal Article
• Authors: Cui, Tengfei; Liu, Daoxin; Cai, Jian; Zhang, Xiaohua
• Is Part Of: Journal of materials research. Volume 31:Issue 24(2016)
• Page Start: 3869
• Page End: 3879
• Publication Date: 2016-12-05
• Subjects: 7B04-T6 aluminum alloy, -- corrosion, -- fatigue, -- environment/load spectrum, -- size effect; Materials -- Research -- Periodicals; 620.1105
• DOI: 10.1557/jmr.2016.441
• Languages: English
• ISSNs: 0884-2914

Abstract

Abstract: Abstract : Influence of corrosion/fatigue factors on the fatigue life of 7B04-T6 aluminum alloys were studied in this paper. Different kinds of alternating corrosion-fatigue tests were carried out. Three factors influencing fatigue life were investigated: pre-corrosion time, corrosion/fatigue alternation frequency, and specimen's size. The results show that: with the extension of pre-corrosion time, fatigue lives decreased; although the total corrosion time was the same (192 h), as the corrosion/fatigue alternation frequency increased, the total fatigue lives increased. The total fatigue lives of specimens subjected to two, four, and six corrosion/fatigue cycles ( n = 2, 4, 6), in which specimens underwent pre-corrosion for 96 h per cycle ( n = 2), 48 h per cycle ( n = 4), and 32 h per cycle ( n = 6), respectively, was measured. It was found that the fatigue lives increased by 56.4, 84.4, 136%, as the number of cycles increased, compared to tests in which no alternation took place (192 h of continuous corrosion). When exposed to the same corrosion times, different sized specimens demonstrated different fatigue lives. The fatigue lives of small specimens were shorter than the larger specimens. These results are all due to the specific properties of corrosion/fatigue factors.