Large Piezoresponse and Ferroelectric Properties of (Bi0.5Na0.5)TiO3–(Bi0.5K0.5)TiO3–Bi(Mg0.5Ti0.5)O3 Thin Films Prepared by Chemical Solution Deposition. Issue 7 (19th March 2013)

• Record Type: Journal Article
• Authors: Jeon, Yu Hong; Patterson, Eric A.; Cann, David P.; Mardilovich, Peter; Stickel, William; Gibbons, Brady J.
• Editors: Zhang, S.
• Is Part Of: Journal of the American Ceramic Society. Volume 96:Issue 7(2013)
• Page Start: 2172
• Page End: 2178
• Publication Date: 2013-03-19
• Subjects: Ceramics -- Periodicals; 620.1405
• DOI: 10.1111/jace.12279
• Languages: English
• ISSNs: 0002-7820

Abstract

Abstract : Bulk ceramic 72.5 mol%(Bi0.5 Na0.5 )TiO3 –22.5 mol%(Bi0.5 K0.5 )TiO3 –5 mol%Bi(Mg0.5 Ti0.5 )O3 (BNT–BKT–BMgT) has previously been reported to show a large high‐field piezoelectric coefficient ( d 33 * = 570 pm/V). In this work, the same composition was synthesized in thin film embodiments on platinized silicon substrates via chemical solution deposition. Overdoping of volatile cations in the precursor solutions was necessary to achieve phase‐pure perovskite. An annealing temperature of 700°C resulted in good ferroelectric properties ( P max = 52 μC/cm 2 and P r = 12 μC/cm 2 ). Quantitative compositional analysis of films annealed at 650°C and 700°C indicated that near ideal atomic ratios were achieved. Compositional fluctuations observed through the film thickness were in good agreement with the existence of voids formed between successive spin‐cast layers, as observed with electron microscopy. Bipolar and unipolar strain measurements were performed via double laser beam interferometry and a high effective piezoelectric coefficient ( d 33, f ) of approximately 75 pm/V was obtained.