Unbonded brickwork for the protection of infills from seismic damage. (15th January 2017)

• Record Type: Journal Article
• Authors: Palios, Xenophon; Fardis, Michael N.; Strepelias, Elias; Bousias, Stathis N.
• Is Part Of: Engineering structures. Volume 131(2017:Jan. 15)
• Page Start: 614
• Page End: 624
• Publication Date: 2017-01-15
• Subjects: Bed joints -- Infill walls -- Masonry blocks -- Masonry infills -- Masonry joints -- Seismic damage -- Seismic deformations -- Seismic testing -- Shake table testing; Structural engineering -- Periodicals; Structural analysis (Engineering) -- Periodicals; Construction, Technique de la -- Périodiques; Génie parasismique -- Périodiques; Pression du vent -- Périodiques; Earthquake engineering; Structural engineering; Wind-pressure; Periodicals; 624.105
• DOI: 10.1016/j.engstruct.2016.10.027
• Languages: English
• ISSNs: 0141-0296

Abstract

Highlights: Infills made of bricks which are free to slide along bed joints suffer very little seismic damage. A viscous filler in joints is vital for gas/water-tightness and thermal/acoustic insulation. To follow the shear distortion of infills, openings need articulated frame corners and tolerances. Infills without mortar go unscathed through earthquakes inducing interstory drifts over 5.5%. A rail-in-groove system along the brick's top and bottom faces works against out-of-plane collapse. Infills without mortar collapse out-of-plane at deflections of about 75% their thickness. Abstract: Brittle masonry infills cannot cope with the interstory seismic displacements of ductile structural systems. They account for most of the economic impact of earthquakes, direct (for repair or replacement) or indirect (due to disruption of occupancy, as tenants are reluctant to use the building before all damage is repaired). Bricks not bound together by mortar at bed joints can slide freely along them and let the infill panel deform freely in its plane, following the seismic motion of the structural frame nearly unstressed and assuming its original shape when the shaking stops. Viscous fillers or factory-applied facings can control air-, vapor- and water transport via the dry joints, without compromising free movement along them. The frames of openings have articulated corners, which let them sway after a fuse breaks at each corner. Clearances between fixed glass panes and their frame are tailored to the seismic displacement demands. Rotating leaves of doors or windows slide vertically and in and out of special cavities in the frame. A rail-in-groove system at the horizontal faces of the bricks locks them together in the wall's out-of-plane direction and stabilizes the wall with the help of membrane forces due to confinement by the frame. Bricks alone can provide the insulation, via an optimal pattern of horizontal holes. Infill walls and their openings become engineered components, with their compliance to performance-based criteria explicitly checked in design calculations. A rudimentary application in a single bay, one-story steel frame infilled with off-the-shelve solid clay bricks was subjected to in-plane quasi-static cyclic loading and to out-of-plane shake table testing. Shallow longitudinal steel straps placed in slots cut along the top and bottom faces of bricks and facing each other, straddled the bed joints to prevent out-of-plane sliding between bricks. Damage after cyclic in-plane interstory drifts of 5.7% was limited to local distress of few bricks near the panel corners, due to hard contact with the columns. In the out-of-plane direction a panel with a slenderness ratio of 22.5 was stable under transverse response accelerations of 0.3 g; it collapsed when the deflection caused the weight of the infill to act outside the wall thickness at the bottom.