Presence of an adsorbent cake layer improves the performance of gravity-driven membrane (GDM) filtration system. (1st January 2017)

• Record Type: Journal Article
• Authors: Shao, Senlin; Feng, Yijing; Yu, Huarong; Li, Jiangyun; Li, Guibai; Liang, Heng
• Is Part Of: Water research. Volume 108(2017)
• Page Start: 240
• Page End: 249
• Publication Date: 2017-01-01
• Subjects: Gravity-driven membrane (GDM) system -- Pre-deposition -- Powdered activated carbon (PAC) -- Anion exchange resin (AER) -- Cake layer; Water -- Pollution -- Research -- Periodicals; 363.7394
• DOI: 10.1016/j.watres.2016.10.081
• Languages: English
• ISSNs: 0043-1354

Abstract

Abstract: Gravity-driven membrane (GDM) filtration is a promising decentralized drinking water treatment process. To improve the performance of GDM system, a thin layer of adsorbent was pre-deposited on the membrane surface prior to filtration (adsorbent-laden GDM system). The tested adsorbents include powdered activated carbon (PAC) and anion exchange resin (AER), and an unmodified GDM system and a SiO2 -laden GDM system were used as controls. In the adsorbent-laden GDM systems, the adsorption of the PAC and AER increased the removal efficiency of natural organic matter by 7.2–43.5% and microcystin-LR, atrazine, and bisphenol A by 7.9–81.2%. The presence of adsorbent particles increased the amount of microorganisms in the cake layer and therefore increased the removal efficiency of assimilable organic matter (AOC) by 20.1–34.4%. In the adsorbent-laden GDM systems, the physically irrecoverable fouling decreased because of the reduction in membrane foulants by the adsorbent layer. However, the presence of adsorbent particles in the cake layer counteracted this effect and increased the physically recoverable fouling. Consequently, the pre-deposited adsorbent layers had only a limited effect on the stabilized flux (2.26–2.65 L/m 2 h). A bilayer structure was found in the cake layer of the adsorbent-laden GDM systems via scanning electron microscopy (SEM), and the cake layer was looser in the presence of adsorbent particles. These results demonstrate that pre-depositing a thin layer of adsorbents on the membrane surface of the GDM system can significantly improve the quality of the permeate without decreasing the stabilized flux. Graphical abstract: Highlights: PAC and AER particles were pre-deposited on the membrane surface of GDM system. The pre-deposited layer significantly increased the pollutant removal efficiency without reducing the stabilized flux. A bilayer structure was found in the cake layer of the adsorbent-laden GDM systems.