Prediction of dryout and post-dryout wall temperature at different operating parameters for once-through steam generators. (December 2016)

• Record Type: Journal Article
• Authors: Shi, Jianxin; Sun, Baozhi; Zhang, Guolei; Song, Fuyuan; Yang, Longbin
• Is Part Of: International journal of heat and mass transfer. Volume 103(2016:Dec.)
• Page Start: 66
• Page End: 76
• Publication Date: 2016-12
• Subjects: Once-through steam generator -- Dryout -- Post-dryout -- Flow boiling -- Heat transfer deterioration; Heat -- Transmission -- Periodicals; Mass transfer -- Periodicals; Chaleur -- Transmission -- Périodiques; Transfert de masse -- Périodiques; Electronic journals; 621.4022
• DOI: 10.1016/j.ijheatmasstransfer.2016.07.027
• Languages: English
• ISSNs: 0017-9310

Abstract

Highlights: Three-flow-field model is used to predict dryout and post-dryout wall temperature. The occurrence of dryout leads to a sharp decline in heat transfer performance. Post-dryout wall temperatures at different mass fluxes are obtained. Dryout occurs later as pressure increases with a smaller wall temperature variation. Abstract: A three-dimensional "unit tube" physical model is established by simplifying the once-through steam generator (OTSG) designed by B&W and a three-dimensional two-fluid three-flow-field mathematical model that takes into account the interactions between liquid droplets and other flow-fields (steam and liquid film) and the interactions between liquid droplets and the wall in liquid deficient regions is introduced. The results of a numerical simulation using the developed OSTG model conducted at different operating parameters show that the three-dimensional two-fluid three-flow-field mathematical model used in this paper can accurately predict the dryout and post-dryout wall temperature distribution of the OTSG at different operating conditions. The simulations also show that the post-dryout wall temperature decreases along the height of the heat transfer tube at low mass fluxes while gradually increases at high mass fluxes, which is opposite to the changes in wall temperature seen in post-departure from the nucleate boiling region. Furthermore, dryout occurs later as pressure increases, with a smaller soaring maximum of the wall temperature. Dryout will occur when the wall temperature gradient reaches or exceeds 250 K/m as the heat flux increases.