Drag reduction on laser-patterned hierarchical superhydrophobic surfaces. Issue 22 (5th May 2016)

• Record Type: Journal Article
• Authors: Tanvir Ahmmed, K. M.; Kietzig, Anne-Marie
• Is Part Of: Soft matter. Volume 12:Issue 22(2016)
• Page Start: 4912
• Page End: 4922
• Publication Date: 2016-05-05
• Subjects: Soft condensed matter -- Periodicals; 530.413
• DOI: 10.1039/c6sm00436a
• Languages: English
• ISSNs: 1744-683X

Abstract

Abstract : Laser-patterned hierarchical surfaces increase drag reduction in fluid flow compared to non-hierarchical surfaces. Surface chemistry affects the drag reduction; however, contact angle measurements are not sufficient to judge it. Abstract : Hierarchical laser-patterned surfaces were tested for their drag reduction abilities. A tertiary level of surface roughness which supports stable Cassie wetting was achieved on the patterned copper samples by laser-scanning multiple times. The laser-fabricated micro/nano structures sustained the shear stress in liquid flow. A rheometer setup was used to measure the drag reduction abilities in term of slip lengths on eight different samples. A considerable increase in slip length (111% on a grate sample) was observed on these surfaces compared to the slip length predictions from the theoretical and the experimental models for the non-hierarchical surfaces. The increase in slip lengths was correlated to the secondary level of roughness observed on the patterned samples. The drag reduction abilities of three different arrangements of the surface features were also compared: posts in a square lattice, parallel grates, and posts in a hexagonal lattice. Although the latter facilitates a stable Cassie state, it nevertheless resulted in a lower normalized slip length compared to the other two arrangements at a similar solid fraction. Furthermore, we coated the laser-patterned surfaces with a silane to test the effect of surface chemistry on drag reduction. While the contact angles were surprisingly similar for both the non-silanized and the silanized samples, we observed higher slip lengths on the latter, which we were able to explain by measuring the respective penetration depths of the liquid–vapour interface between surface features.