Fabrication of biomimetic superhydrophobic surfaces by a simple flame treatment method. (12th May 2016)

• Record Type: Journal Article
• Authors: Li, Guangji; He, Deliu; Lin, Yinlei; Chen, Zhifeng; Liu, Yunhong; Peng, Xinyan
• Is Part Of: Polymers for advanced technologies. Volume 27:Number 11(2016)
• Page Start: 1438
• Page End: 1445
• Publication Date: 2016-05-12
• Subjects: superhydrophobicity -- flame treatment -- biomimetic surface -- replica molding; Polymers -- Periodicals; 668.9
• DOI: 10.1002/pat.3812
• Languages: English
• ISSNs: 1042-7147

Abstract

Abstract : A simple flame treatment method was explored to construct micro/nanostructures on a surface and then fabricate a biomimetic superhydrophobic surface at a relatively low cost. SiO2 ‐containing polydimethylsiloxane (PDMS) was used as a substrate. The PDMS replicas with various micropatterned surfaces were fabricated using grass leaf, sand paper, and PET sheet with parallel groove geometry as templates via PDMS replica molding. The PDMS replica surfaces with micron structures and the surface of a flat PDMS sheet as a control sample were further treated by flame. The fabricated surfaces were characterized by scanning electron microscopy and water contact angle measurements. The effect of surface microstructures on the transparency of PDMS was also investigated. The studies indicate that the fine nanoscale structures can be produced on the surfaces of PDMS replicas and a flat PDMS sheet by a flame treatment method, and that the hierarchical surface roughness can be adjusted and controlled by varying the flame treatment time. The flame‐treated surfaces of PDMS replicas and a flat PDMS sheet possess superhydrophobicity and an ultra‐low sliding angle reaching a limiting value of 1°, and the anisotropic wettability of the PDMS replica surface with oriented microgroove structures can be greatly suppressed via flame treatment. The visible light transmittance of the flame‐treated flat PDMS surface decreases with prolonged flame treatment times. Copyright © 2016 John Wiley & Sons, Ltd.