Design and assembly of an aqueous red CdTe QD-LED: major factors to fabricate aqueous QD-LEDs. Issue 81 (16th August 2016)

• Record Type: Journal Article
• Authors: Du, Jinhua; Xu, Shuhong; Wang, Chunlei; Pan, Jiangyong; Chen, Jing; Zhu, Li; Lv, Changgui; Cui, Yiping
• Is Part Of: RSC advances. Volume 6:Issue 81(2016)
• Page Start: 77963
• Page End: 77967
• Publication Date: 2016-08-16
• Subjects: Chemistry -- Periodicals; 540.5
• DOI: 10.1039/c6ra15558h
• Languages: English
• ISSNs: 2046-2069

Abstract

Abstract : The aqueous red CdTe QD-LED with structure of ITO/PEDOT:PSS/PVK/CdTe QDs/ZnO/Al. Two major factors to fabricate an aqueous QD-LED successfully are adding wet agent to the QDs solution and removing the composite ions remaining in the QDs solution. Abstract : The first aqueous red CdTe QD-LED was fabricated with the structure of ITO/PEDOT:PSS/PVK/CdTe QDs/ZnO/Al. The device has been considered to be an advanced aqueous QD-LED, which demonstrated a turn-on voltage of about 5 V. Further, its current density and brightness would also reach 92 mA cm −2 and 58 cd m −2 at the voltage of 10 V. Moreover, we found that there were two essential factors for fabricating an aqueous QD-LED successfully: (1) adding wet agent to the QD solution, (2) removing the composite ions remaining in the QD solution. Meanwhile, the EL intensity of the aqueous QD-LEDs will perform better if the solution of QDs is acidic. These results offer a promising approach to the further development of aqueous QD-LEDs.