Hybrid recursive active filters for duplexing in RF transmitter front‐ends. Issue 8 (19th August 2016)

• Record Type: Journal Article
• Authors: Gottardo, Giuseppe; Donati, Giovanni; Musolff, Christian; Fischer, Georg; Felgentreff, Tilman
• Is Part Of: Radio science. Volume 51:Issue 8(2016:Aug.)
• Page Start: 1363
• Page End: 1376
• Publication Date: 2016-08-19
• Subjects: active filter -- feedback amplifier -- base station -- stability analysis -- interference suppression -- band‐pass filters; Radio meteorology -- Periodicals; Radio wave propagation -- Periodicals; 621.38405
• DOI: 10.1002/2016RS005969
• Languages: English
• ISSNs: 0048-6604

Abstract

Abstract: Duplex filters in modern base transceiver stations shape the channel in order to perform common frequency division duplex operations. Usually, they are designed as cavity filters, which are expensive and have large dimensions. Thanks to the emerging digital technology and fast digital converters, it is possible to transfer the efforts of designing analog duplex filters into digital numeric algorithms applied to feedback structures, operating on power. This solution provides the shaping of the signal spectrum directly at the output of the radio frequency (RF) power amplifiers (PAs) relaxing the transmitter design especially in the duplexer and in the antenna sections. The design of a digital baseband feedback applied to the analog power RF amplifiers (hybrid filter) is presented and verified by measurements. A model to describe the hybrid system is investigated, and the relation between phase and resonance peaks of the resulting periodic band‐pass transfer function is described. The stability condition of the system is analyzed using Nyquist criterion. A solution involving a number of digital feedback and forward branches is investigated defining the parameters of the recursive structure. This solution allows the closed loop system to show a periodic band pass with up to 500 kHz bandwidth at the output of the RF amplifier. The band‐pass magnitude reaches up to 17 dB selectivity. The rejection of the PA noise in the out‐of‐band frequencies is verified by measurements. The filter is tested with a modulated LTE (Long Term Evolution) signal showing an ACPR (Adjacent Channel Power Ratio) enhancement of 10 dB of the transmitted signal. Key Points: A digital baseband feedback is applied to the analog power RF amplifier obtaining a hybrid filter The hybrid recursive active filter shapes the transmitter output spectrum The usage of multiple feedbacks and parallel structures gives more degrees of freedom to the shaping capabilities