An incremental approach for springback analysis of elasto-plastic beam undergoing contact driven large deflection. (September 2016)

• Record Type: Journal Article
• Authors: Pandit, D.; Srinivasan, Sivakumar M.
• Is Part Of: International journal of mechanical sciences. Volume 115/116(2016)
• Page Start: 24
• Page End: 33
• Publication Date: 2016-09
• Subjects: Incremental formulation -- Nonlinear differential equation -- Bi-linear material model -- Contact -- Large deflection; Mechanical engineering -- Periodicals; Génie mécanique -- Périodiques; Mechanical engineering; Maschinenbau; Mechanik; Zeitschrift; Periodicals; 621.05
• DOI: 10.1016/j.ijmecsci.2016.06.003
• Languages: English
• ISSNs: 0020-7403

Abstract

Abstract: In this article the solution methodology for a beam on a vee-die undergoing large elasto-plastic deflection along with nonlinear contact development with the die is discussed. A bi-linear stress strain material model is converted into an incremental moment- curvature based constitutive law to ease formulation. The one dimensional governing equation obtained, is highly nonlinear owing to material and geometry and involve boundary condition change. The entire problem is solved in three steps: solving an end loaded cantilever under non-conservative force, followed by choosing the solutions which satisfy the configurational constraint and finally reanalyzing the contact data for springback analysis. The end loaded cantilever problem is solved by an incremental procedure coupled with Runge–Kutta fourth-order explicit initial value solver. Suitable normalization of the pertinent variables of the governing equation paved the way to identify dependence of the responses on a unique non-dimensional parameter. The presented methodology doesn't involve large matrix inversion and so is computationally economic. It may be used in sheet metal manufacturing control facilities to predict springback and reduce the expensive experimental iterations. Abstract : Highlights: A mechanics of materials based approach for long sheet forming process developed. An incremental approach coupled with Runge–Kutta 4th order method is implemented. Incremental moment-curvature constitutive law employed. A non dimensional structural and material parameter is found to govern springback. Decreasing the non-dimensional parameter decreases springback.