Determination of Butylated Hydroxyanisole by Briggs‐Rauscher Oscillating Reaction Catalyzed by a Macrocyclic Nickel (II) Complex. Issue 7 (7th June 2016) - Hu, Juanjuan
Abstract: A novel analytical approach for quantitative measurement of butylated hydroxyanisole (BHA) is dis‐ cussed in this paper. Such a method depends on the inhibitory effect of BHA on a Briggs‐Rauscher (B‐R) oscillating reaction. Unlike the classical B‐R system which involves Mn 2+ as the catalyst, such a B‐R sys‐ tem is catalyzed by a macrocyclic nickel (II) complex [NiL](ClO4 )2, where L in the complex is an unsatu‐ rated ligand 5, 7, 7, 12, 14, 14‐hexemethyl‐1, 4, 8, 11‐tetraazacyclotetradeca‐4, 11‐diene. By perturbation of BHA on the system, the oscillation was inhibited in the presence trace amounts of BHA and the inhibition time was found to be proportional to the concentration of BHA over the range 1.00×10 −7 –1.20×10 −4 mol/L. Two calibration curves were obtained: the first linear regression is over the range of 1.00×10 −7 –2.00×10 −6 mol/L, and the second linear regression is over the range between 2.00×10 −6 and 1.20×10 −4 mol/L, with a lowest limit of detection of 4.00×10 −8 mol/L. UV spectra measurements were employed to clarify the possible perturbation mechanism caused by BHA on the B‐R oscillating reaction. Abstract : Due to the reaction between butylated hydroxyanisole (BHA) and HOO radical, the [NiL] 2+ ‐catalyzed B‐R system was applied for quantitative measurement of lipophilic antioxidant BHA. Microscale BHA has an inhibition effect on such a reaction and the inhibition time is proportional to the BHA concentration over the range of 1.00×10 −7 mol/L to 1.20×10 −4 mol/L.