Application of continuous normal–lognormal bivariate density functions in a sensitivity analysis of municipal solid waste landfill. (September 2016)

• Record Type: Journal Article
• Authors: Petrovic, Igor; Hip, Ivan; Fredlund, Murray D.
• Is Part Of: Waste management. Volume 55(2016)
• Page Start: 141
• Page End: 153
• Publication Date: 2016-09
• Subjects: Sensitivity -- Shear strength -- Stability -- Probability -- Waste landfill; Hazardous wastes -- Periodicals; Refuse and refuse disposal -- Periodicals; 363.728
• DOI: 10.1016/j.wasman.2015.11.021
• Languages: English
• ISSNs: 0956-053X

Abstract

Highlights: Statistical model for determination of MSW shear strength parameters is proposed. The model takes into account ageing effect of waste and appropriate strain levels. Realistic ranges of strength parameters for recently closed landfill are defined. The probability of failure and the reliability index of landfill body were computed. The level of performance for the computed reliability index was above average. Abstract: The variability of untreated municipal solid waste (MSW) shear strength parameters, namely cohesion and shear friction angle, with respect to waste stability problems, is of primary concern due to the strong heterogeneity of MSW. A large number of municipal solid waste (MSW) shear strength parameters (friction angle and cohesion) were collected from published literature and analyzed. The basic statistical analysis has shown that the central tendency of both shear strength parameters fits reasonably well within the ranges of recommended values proposed by different authors. In addition, it was established that the correlation between shear friction angle and cohesion is not strong but it still remained significant. Through use of a distribution fitting method it was found that the shear friction angle could be adjusted to a normal probability density function while cohesion follows the log-normal density function. The continuous normal–lognormal bivariate density function was therefore selected as an adequate model to ascertain rational boundary values ("confidence interval") for MSW shear strength parameters. It was concluded that a curve with a 70% confidence level generates a "confidence interval" within the reasonable limits. With respect to the decomposition stage of the waste material, three different ranges of appropriate shear strength parameters were indicated. Defined parameters were then used as input parameters for an Alternative Point Estimated Method (APEM) stability analysis on a real case scenario of the Jakusevec landfill. The Jakusevec landfill is the disposal site of the capital of Croatia – Zagreb. The analysis shows that in the case of a dry landfill the most significant factor influencing the safety factor was the shear friction angle of old, decomposed waste material, while in the case of a landfill with significant leachate level the most significant factor influencing the safety factor was the cohesion of old, decomposed waste material. The analysis also showed that a satisfactory level of performance with a small probability of failure was produced for the standard practice design of waste landfills as well as an analysis scenario immediately after the landfill closure.