Humidity and Temperature Dependences of Oxygen Transport Resistance of Nafion Thin Film on Platinum Electrode. (10th August 2016)

• Record Type: Journal Article
• Authors: Kudo, Kenji; Jinnouchi, Ryosuke; Morimoto, Yu
• Is Part Of: Electrochimica acta. Volume 209(2016)
• Page Start: 682
• Page End: 690
• Publication Date: 2016-08-10
• Subjects: polymer electrolyte fuel cells -- thin film -- Nafion -- ionomer -- oxygen transport; Electrochemistry -- Periodicals; Electrochemistry, Industrial -- Periodicals; 541.37
• DOI: 10.1016/j.electacta.2016.04.023
• Languages: English
• ISSNs: 0013-4686

Abstract

Abstract: The oxygen transport resistances of Nafion thin films on a Pt electrode and of a bulk Nafion were evaluated to clarify the dominant part of the oxygen transport loss in an ionomer for a cathode catalyst layer of polymer electrolyte fuel cells. To evaluate the oxygen transport resistances of the Nafion thin film, an oxygen flux through the Nafion thin film on the Pt was detected as diffusion limited current density, jd, for an oxygen reduction reaction by using an electrochemical cell equipped with a Pt microelectrode coated with a Nafion film less than 100 nm. An interfacial oxygen transport resistance and inner resistivity of the Nafion thin film were separately determined by the relation between jd −1 normalized by oxygen partial pressure and the film thickness. The interfacial resistance is equivalent to 30–70 nm of the Nafion film, which are much thicker than a typical ionomer thickness of ∼10 nm observed in catalyst layers. From the above results and our recent theoretical results obtained by molecular dynamics techniques, the oxygen permeation fluxes through the ionomers in catalyst layers can be regarded as dominantly controlled by the oxygen permeation at the Pt/ionomer interface.