Crack identification for rotating machines based on a nonlinear approach. (15th October 2016)

• Record Type: Journal Article
• Authors: Cavalini Jr, A.A.; Sanches, L.; Bachschmid, N.; Steffen Jr, V.
• Is Part Of: Mechanical systems and signal processing. Volume 79(2016)
• Page Start: 72
• Page End: 85
• Publication Date: 2016-10-15
• Subjects: Rotating machine -- Crack identification -- Combinational resonances -- Multiple scales method; Structural dynamics -- Periodicals; Vibration -- Periodicals; Constructions -- Dynamique -- Périodiques; Vibration -- Périodiques; Structural dynamics; Vibration; Periodicals; 621
• DOI: 10.1016/j.ymssp.2016.02.041
• Languages: English
• ISSNs: 0888-3270

Abstract

Abstract: In a previous contribution, a crack identification methodology based on a nonlinear approach was proposed. The technique uses external applied diagnostic forces at certain frequencies attaining combinational resonances, together with a pseudo-random optimization code, known as Differential Evolution, in order to characterize the signatures of the crack in the spectral responses of the flexible rotor. The conditions under which combinational resonances appear were determined by using the method of multiple scales. In real conditions, the breathing phenomenon arises from the stress and strain distribution on the cross-sectional area of the crack. This mechanism behavior follows the static and dynamic loads acting on the rotor. Therefore, the breathing crack can be simulated according to the Mayes׳ model, in which the crack transition from fully opened to fully closed is described by a cosine function. However, many contributions try to represent the crack behavior by machining a small notch on the shaft instead of the fatigue process. In this paper, the open and breathing crack models are compared regarding their dynamic behavior and the efficiency of the proposed identification technique. The additional flexibility introduced by the crack is calculated by using the linear fracture mechanics theory (LFM). The open crack model is based on LFM and the breathing crack model corresponds to the Mayes׳ model, which combines LFM with a given breathing mechanism. For illustration purposes, a rotor composed by a horizontal flexible shaft, two rigid discs, and two self-aligning ball bearings is used to compose a finite element model of the system. Then, numerical simulation is performed to determine the dynamic behavior of the rotor. Finally, the results of the inverse problem conveyed show that the methodology is a reliable tool that is able to estimate satisfactorily the location and depth of the crack. Highlights: A crack identification methodology devoted to rotating machines is proposed. The open and breathing crack models are compared regarding their dynamic behavior. In certain cases the diagnostic forces can be applied to the structure under operating conditions. The results presented demonstrate the efficiency of the methodology conveyed.