Trajectory tracking controller of the hybrid robot for milling. (August 2016)

• Record Type: Journal Article
• Authors: Petko, Maciej; Karpiel, Grzegorz; Gac, Konrad; Góra, Grzegorz; Kobus, Konrad; Ochoński, Janusz
• Is Part Of: Mechatronics. Volume 37(2016)
• Page Start: 100
• Page End: 111
• Publication Date: 2016-08
• Subjects: Hybrid robots -- Parallel robots -- Robot control -- Trajectory tracking control -- 5-DOF milling -- Model predictive control; Computer integrated manufacturing systems -- Periodicals; Flexible manufacturing systems -- Periodicals; Mechatronics -- Periodicals; Productique -- Périodiques; Fabrication, Systèmes flexibles de -- Périodiques; Mécatronique -- Périodiques; Computer integrated manufacturing systems; Flexible manufacturing systems; Mechatronics; Periodicals; 629.89
• DOI: 10.1016/j.mechatronics.2016.03.012
• Languages: English
• ISSNs: 0957-4158

Abstract

Highlights: Model predictive control algorithm of the computed torque type was proposed. Hybrid manipulator structural model was formulated. Nonlinear modification was introduced into the control law. Algorithm performance was experimentally tested on the robot physical prototype. Tracking accuracy is good for the parallel, but unsatisfactory for the serial part. Abstract: The paper presents a model predictive trajectory tracking controller for a five degree of freedom hybrid robot for milling. The construction of the manipulator is introduced, forward and inverse kinematics problems are solved in a closed analytical form, a simplified dynamic model, suitable for control synthesis is described. Control law of the computed torque type is proposed with modifications that improve the performance of trajectory tracking. The control algorithm is tested in experiments conducted on a robot material prototype without actual milling. The presented results are very good for the parallel part of the robot, but require improvement for the serial part. Finally, the conclusions and indications towards future investigations are presented.