Hydrodynamic effects on three phase micro-packed bed reactor performance – Gold–palladium catalysed benzyl alcohol oxidation. (31st July 2016)

• Record Type: Journal Article
• Authors: Al-Rifai, Noor; Galvanin, Federico; Morad, Moataz; Cao, Enhong; Cattaneo, Stefano; Sankar, Meenakshisundaram; Dua, Vivek; Hutchings, Graham; Gavriilidis, Asterios
• Is Part Of: Chemical engineering science. Volume 149(2016)
• Page Start: 129
• Page End: 142
• Publication Date: 2016-07-31
• Subjects: Multiphase microreactor -- Hydrodynamics -- Multiphase flow -- Aerobic oxidation -- Gold/palladium catalyst -- Response surface methodology; Chemical engineering -- Periodicals; Génie chimique -- Périodiques; Chemical engineering; Periodicals; Electronic journals; 660
• DOI: 10.1016/j.ces.2016.03.018
• Languages: English
• ISSNs: 0009-2509

Abstract

Abstract: The hydrodynamics of a three-phase micro-packed bed reactor and its effect on catalysed benzyl alcohol oxidation with pure oxygen were studied in a silicon–glass microstructured reactor. The microreactor was operated at 120 °C and 1 barg and contained a channel with a 300 μm×600 μm cross-section, packed with 1 wt% Au–Pd/TiO2 catalyst, 65 μm in average diameter. Improvements in the conversion of benzyl alcohol and selectivity to benzaldehyde were observed with increasing gas-to-liquid ratio, which coincided with a change in the flow pattern from a liquid-dominated slug to a gas-continuous flow regime. The observed enhancement is attributed to improved external mass transfer, associated with an increase in the gas–liquid interfacial area and reduction in the liquid film thickness that occur with gradual changes in the flow pattern. A maximum selectivity of 93% to benzaldehyde was obtained under partial wetting – which introduced the added benefit of direct gas–solid mass transfer – outperforming the selectivity in a conventional glass stirred reactor. However, this was at the expense of a reduction in the conversion. A response surface model was developed and then used to predict optimal operating conditions for maximum benzaldehyde yield, which were in the gas-continuous flow regime. This corresponded to relatively high gas flow rate in conjunction with moderate liquid flow rate, ensuring sufficient catalyst wetting with a thin film to reduce transport resistances. Graphical abstract: Highlights: Hydrodynamics influence the performance of Au–Pd catalysed benzyl alcohol oxidation in a micro-packed bed. Mass transfer enhancement is found in the gas-continuous flow regime. Benzaldehyde selectivity higher than a batch reactor is obtained at very high gas:liquid flow rate ratios. Flow regimes in three phase micro-packed beds differ from their macro-scale counterparts. A response surface model is able to locate the operating conditions for yield optimisation.