Performance evaluation of a vapor injection refrigeration system using mixture refrigerant R290/R600a. (May 2016)

• Record Type: Journal Article
• Authors: d'Angelo, José Vicente Hallak; Aute, Vikrant; Radermacher, Reinhard
• Is Part Of: International journal of refrigeration. Volume 65(2016:May)
• Page Start: 194
• Page End: 208
• Publication Date: 2016-05
• Subjects: Simulation -- Mixture refrigerant -- Vapor injection -- R290 -- R600a -- Hydrocarbon; Simulation -- Mélange de frigorigènes -- Injection de vapeur -- R290 -- R600a -- Hydrocarbure; Refrigeration and refrigerating machinery -- Periodicals; 621.56
• DOI: 10.1016/j.ijrefrig.2016.01.019
• Languages: English
• ISSNs: 0140-7007

Abstract

Highlights: A vapor injection refrigeration cycle using mixture R290/R600a was studied. Two different cases related to the choice of reference temperatures were evaluated. A parametric analysis of the main operating variables of the cycle was performed. Best performance was achieved between 40 and 50 wt% R290 and expansion ratio of 50%. Abstract: This work presents a performance evaluation of a vapor injection refrigeration system using a mixture refrigerant R290/R600a, through steady-state simulations used to accomplish a parametric analysis considering the influence of the refrigerant composition over the following parameters: COP; compressor power; refrigerant mass flow rate; refrigerant temperature glide; mass flow ratio between vapor and feed streams in the flash tank; liquid and vapor composition of flash tank outlet streams and compression ratio. Two cases, denominated A and B, considering different fixed temperatures at the refrigeration system were studied and their performances were compared with the one of a basic vapor compression cycle. A maximum COP was obtained for a mixture containing 40 wt% of R290. COP of vapor injection refrigeration cycle is 16–32% greater than the one of a vapor compression cycle, depending on the composition of the mixture refrigerant and pressure drop at the cycle upper-stage expansion valve.