Detection of tool deflection in milling by a sensory axis slide for machine tools. (March 2016)

• Record Type: Journal Article
• Authors: Denkena, Berend; Litwinski, Kai Martin; Boujnah, Haythem
• Is Part Of: Mechatronics. Volume 34(2016)
• Page Start: 95
• Page End: 99
• Publication Date: 2016-03
• Subjects: Sensory axis slide -- Process monitoring -- Tool deflection; Computer integrated manufacturing systems -- Periodicals; Flexible manufacturing systems -- Periodicals; Mechatronics -- Periodicals; Productique -- Périodiques; Fabrication, Systèmes flexibles de -- Périodiques; Mécatronique -- Périodiques; Computer integrated manufacturing systems; Flexible manufacturing systems; Mechatronics; Periodicals; 629.89
• DOI: 10.1016/j.mechatronics.2015.09.008
• Languages: English
• ISSNs: 0957-4158

Abstract

Abstract: Previous publications regarding the project Gentelligent Components for Machine Tools of the Collaborative Research Center 653 presented the design of a new sensory z -slide for a 5-axis machining center. Equipped with several strain sensors, the new slide is able to feel the machining process by measuring the process forces and vibrations. Here, a challenge is the detection of mechanical strains in the slide without degrading its high global stiffness. The application of micro strain gages in small notches on the slide represents a promising approach for the improvement of the sensitivity as well as the integration of sensors into the slide. This paper presents the utilization of the sensing axis-slide in a manufacturing environment. For this purpose, a first prototype of the slide is build and integrated into a milling center DMG HSC 55 linear. In this test machine, the dynamic characteristics of the integrated slide are identified with frequency response function measurements. Based on force measurements with a dynamometer, force calibration matrices are computed to calculate the forces in the machine coordinate system at the tool center point from the measured strain signals during milling processes. The force sensing with the slide allows furthermore the identification of tool characteristics such as the static tool stiffness. This parameter is estimated from the ratio of the measured contact forces and the set collision distance when moving the tool smoothly into the work piece. The known tool stiffness enables the detection of the static tool deflection from the force signals during a milling process. To compare the detected tool deflection with the real tool deflection, reference measurements on the work piece are performed using a perthometer. For further monitoring applications of the tool deflection in more complex 2.5D milling an approach to transform the measured forces from the stationary machine coordinate system into the moving tool coordinate system is presented.