Improving load sharing in hybrid bonded/bolted composite joints using an interference-fit bolt. (1st August 2016)

• Record Type: Journal Article
• Authors: Raju, Karthik Prasanna; Bodjona, Kobye; Lim, Gyu-Hyeong; Lessard, Larry
• Is Part Of: Composite structures. Volume 149(2016)
• Page Start: 329
• Page End: 338
• Publication Date: 2016-08-01
• Subjects: Composite -- Joints -- Hybrid bonded/bolted -- Finite element modelling -- Interference-fit -- Load sharing; Composite construction -- Periodicals; Composites -- Périodiques; 624.18
• DOI: 10.1016/j.compstruct.2016.04.025
• Languages: English
• ISSNs: 0263-8223

Abstract

Abstract: Load sharing between an adhesive bond and a bolted connection in a hybrid bonded/bolted joint has been experimentally demonstrated in previous studies using a low modulus adhesive. The possibility of sharing load between the two joining mechanisms can potentially result in a joint having higher static and fatigue strength compared to the underlying bonded and bolted joint separately. However, in such designs, despite using a low modulus adhesive, substantial load sharing seems to occur only after the adhesive in the hybrid joint has yielded. This limits the load sharing capability of the hybrid joint. In order to improve the load sharing, a new design using an interference-fit bolt instead of the conventional neat-fit or clearance fit bolt for hybrid joints has been investigated using a three-dimensional finite element model in this study. The interference fit hybrid joint model showed 10% higher load sharing at equivalent load levels and activation of load sharing between the bolt and the adhesive as soon as the joint is loaded, a capability not achieved through conventional hybrid joint designs.