Use of ADCPs for suspended sediment transport monitoring: An empirical approach. Issue 4 (8th April 2016)

• Record Type: Journal Article
• Authors: Venditti, J. G.; Church, M.; Attard, M. E.; Haught, D.
• Is Part Of: Water resources research. Volume 52:Issue 4(2016:Apr.)
• Page Start: 2715
• Page End: 2736
• Publication Date: 2016-04-08
• Subjects: ADCP -- suspended sediment -- sediment monitoring -- calibration; Hydrology -- Periodicals; 333.91
• DOI: 10.1002/2015WR017348
• Languages: English
• ISSNs: 0043-1397

Abstract

Abstract: A horizontally mounted 300 kHz acoustic Doppler current profiler was deployed in Fraser River at Mission, British Columbia, to test its capability to detect size‐classified concentration of suspended sediment. Bottle samples in‐beam provide a direct calibration of the hADCP signals. We also deployed a 600 kHz vertically mounted ADCP from a boat in combination with bottle samples. Fraser River at Mission is 525 m wide with moderate suspended sediment concentration (up to 350 mg L −1 in our measurements, mostly silt), and a modest sand load only at high flows. We use an entirely empirical approach to calculate the sediment load using ADCPs to test the reliability of acoustic methods when assumptions embedded in the sonar equation about the relation between suspended sediment size and concentration, and acoustic signals are violated. vADCP calibration using matched individual bottle samples and acoustic backscatter departed from the expected theoretical relation. Calibration using depth‐averaged sediment concentration and acoustic backscatter more closely matched theoretical expectations, but varied through the season. hADCP calibrations conformed with theoretical expectations and did not exhibit seasonal variation. Silt and sand were successfully discriminated; however, silt dominates the correlations. We found no coherent relation between acoustic attenuation and silt concentration. In‐beam results are extended by correlation to estimate mean sediment concentration and total suspended flux in the entire channel: this auxiliary correlation cancels any calibration bias and permits monitoring of size‐classified suspended sediment in absence of detailed information of sediment grain‐size distribution. Key Points: ADCP calibrations for suspended sediment conform with acoustic theory Sand and silt both correlate with acoustic backscatter Auxiliary relations extend results to full‐channel transport