Deactivation of Cu-SSZ-13 by SO2 exposure under SCR conditions. Issue 8 (24th December 2015)
- Record Type:
- Journal Article
- Title:
- Deactivation of Cu-SSZ-13 by SO2 exposure under SCR conditions. Issue 8 (24th December 2015)
- Main Title:
- Deactivation of Cu-SSZ-13 by SO2 exposure under SCR conditions
- Authors:
- Wijayanti, Kurnia
Leistner, Kirsten
Chand, Shilpa
Kumar, Ashok
Kamasamudram, Krishna
Currier, Neal W.
Yezerets, Aleksey
Olsson, Louise - Abstract:
- Abstract : Sulfur poisoning is worse in SCR conditions as seen in the figure. Sulfur can be gradually removed during SCR conditions until a certain limit. Sulfur is removed more easily in the front part of the catalyst. Increased ammonia storage is observed due to storage on sulfur species. Abstract : A deactivation study of Cu-SSZ-13 has been conducted using SO2 exposure under SCR conditions and examining its effect on different reactions involving NH3 -SCR. Several reactions, including NH3 storage/TPD, NO/NH3 oxidation, standard SCR, fast SCR and SCR with 75% NO2, as well as NH3 –NO2 storage/TPD, were investigated at a temperature range of 100–400 °C after exposing the catalyst to 30 ppm SO2 under SCR conditions at 300 °C for 90 min. The catalyst was characterized using XRD, BET, ICP-SFMS and H2 -TPR. The BET surface area and pore volume decreased after the sulfur treatment presumably due to blocking by sulfur and/or ammonium–sulfur species. It was found that sulfur was not uniformly deposited along the monolith channel. The deposition occurred from the inlet towards the outlet, as evident from ICP-SFMS measurements. Part of the sulfur was removed after an SCR experiment up to 400 °C. However, this removal was observed only in the inlet half of the sample and not in the outlet. Ammonia TPD experiments revealed that the sulfur poisoning resulted in additional sites that were capable of adsorbing ammonia, resulting in increased ammonia storage. Moreover, standard SCR wasAbstract : Sulfur poisoning is worse in SCR conditions as seen in the figure. Sulfur can be gradually removed during SCR conditions until a certain limit. Sulfur is removed more easily in the front part of the catalyst. Increased ammonia storage is observed due to storage on sulfur species. Abstract : A deactivation study of Cu-SSZ-13 has been conducted using SO2 exposure under SCR conditions and examining its effect on different reactions involving NH3 -SCR. Several reactions, including NH3 storage/TPD, NO/NH3 oxidation, standard SCR, fast SCR and SCR with 75% NO2, as well as NH3 –NO2 storage/TPD, were investigated at a temperature range of 100–400 °C after exposing the catalyst to 30 ppm SO2 under SCR conditions at 300 °C for 90 min. The catalyst was characterized using XRD, BET, ICP-SFMS and H2 -TPR. The BET surface area and pore volume decreased after the sulfur treatment presumably due to blocking by sulfur and/or ammonium–sulfur species. It was found that sulfur was not uniformly deposited along the monolith channel. The deposition occurred from the inlet towards the outlet, as evident from ICP-SFMS measurements. Part of the sulfur was removed after an SCR experiment up to 400 °C. However, this removal was observed only in the inlet half of the sample and not in the outlet. Ammonia TPD experiments revealed that the sulfur poisoning resulted in additional sites that were capable of adsorbing ammonia, resulting in increased ammonia storage. Moreover, standard SCR was significantly deactivated by SO2 poisoning under SCR conditions. Due to the site-blocking effect of the ammonium–sulfur species, fewer copper sites are likely available for the redox SCR cycle. Furthermore, the effect of sulfur poisoning on NH3 oxidation and NO2 -SCR as well as N2 O production in various SCR reactions were observed. Finally, it was found that the conditions for the sulfur poisoning were critical in which SO2 deactivation under SCR conditions (NH3 + NO + O2 + H2 O) was more severe compared to SO2 poisoning in O2 + H2 O alone. … (more)
- Is Part Of:
- Catalysis science & technology. Volume 6:Issue 8(2016)
- Journal:
- Catalysis science & technology
- Issue:
- Volume 6:Issue 8(2016)
- Issue Display:
- Volume 6, Issue 8 (2016)
- Year:
- 2016
- Volume:
- 6
- Issue:
- 8
- Issue Sort Value:
- 2016-0006-0008-0000
- Page Start:
- 2565
- Page End:
- 2579
- Publication Date:
- 2015-12-24
- Subjects:
- Catalysis -- Periodicals
541.395 - Journal URLs:
- http://pubs.rsc.org/en/Journals/JournalIssues/CY ↗
http://www.rsc.org/ ↗ - DOI:
- 10.1039/c5cy01288k ↗
- Languages:
- English
- ISSNs:
- 2044-4753
- Deposit Type:
- Legaldeposit
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library DSC - 3090.943100
British Library DSC - BLDSS-3PM
British Library STI - ELD Digital store - Ingest File:
- 2601.xml