Discrete element method modeling of inherently anisotropic rocks under uniaxial compression loading. (11th November 2015)

• Record Type: Journal Article
• Authors: Duan, K.; Kwok, C.Y.; Pierce, M.
• Is Part Of: International journal for numerical and analytical methods in geomechanics. Volume 40:Number 8(2016)
• Page Start: 1150
• Page End: 1183
• Publication Date: 2015-11-11
• Subjects: discrete element method -- inherently anisotropic -- failure patterns -- smooth‐joint contact -- micro‐mechanical analysis; Soil mechanics -- Mathematics -- Periodicals; Rock mechanics -- Mathematics -- Periodicals; 624.1510151
• DOI: 10.1002/nag.2476
• Languages: English
• ISSNs: 0363-9061

Abstract

Summary: A new numerical approach is proposed in this study to model the mechanical behaviors of inherently anisotropic rocks in which the rock matrix is represented as bonded particle model, and the intrinsic anisotropy is imposed by replacing any parallel bonds dipping within a certain angle range with smooth‐joint contacts. A series of numerical models with β = 0°, 15°, 30°, 45°, 60°, 75°, and 90° are constructed and tested ( β is defined as the angle between the normal of weak layers and the maximum principal stress direction). The effect of smooth‐joint parameters on the uniaxial compression strength and Young's modulus is investigated systematically. The simulation results reveal that the normal strength of smooth‐joint mainly affects the behaviors at high anisotropy angles ( β > 45°), while the shear strength plays an important role at medium anisotropy angles (30°–75°). The normal stiffness controls the mechanical behaviors at low anisotropy angles. The angle range of parallel bonds being replaced plays an important role on defining the degree of anisotropy. Step‐by‐step procedures for the calibration of micro parameters are recommended. The numerical model is calibrated to reproduce the behaviors of different anisotropic rocks. Detailed analyses are conducted to investigate the brittle failure process by looking at stress‐strain behaviors, increment of micro cracks, initiation and propagation of fractures. Most of these responses agree well with previous experimental findings and can provide new insights into the micro mechanisms related to the anisotropic deformation and failure behaviors. The numerical approach is then applied to simulate the stress‐induced borehole breakouts in anisotropic rock formations at reduced scale. The effect of rock anisotropy and stress anisotropy can be captured. Copyright © 2015 John Wiley & Sons, Ltd.