Shaking table test on the collapse process of a three-story reinforced concrete frame structure. (1st July 2016)

• Record Type: Journal Article
• Authors: Li, Shuang; Zuo, Zhanxuan; Zhai, Changhai; Xu, Shiyu; Xie, Lili
• Is Part Of: Engineering structures. Volume 118(2016:Jul. 01)
• Page Start: 156
• Page End: 166
• Publication Date: 2016-07-01
• Subjects: RC frame structure -- Shaking table test -- Collapse process -- Dynamic property -- Collapse mechanism -- Benchmark test; Structural engineering -- Periodicals; Structural analysis (Engineering) -- Periodicals; Construction, Technique de la -- Périodiques; Génie parasismique -- Périodiques; Pression du vent -- Périodiques; Earthquake engineering; Structural engineering; Wind-pressure; Periodicals; 624.105
• DOI: 10.1016/j.engstruct.2016.03.032
• Languages: English
• ISSNs: 0141-0296

Abstract

Highlights: We conducted a complete collapse shaking table test on a RC frame structure. Provides valuable test data to verify analytical and/or numerical collapse studies. Binocular stereo vision technique was utilized to record the displacement responses. Collapse is induced by both the plastic hinges and punching damage in slabs. High-frequency acceleration in near collapse stage is useful in collapse detection. Abstract: This study explores the collapse process of a reinforced concrete (RC) frame structure subjected to earthquake shakings, by applying the shaking table test on a three-story, one-bay, 1/5-scaled RC structural model. The frame specimen transformed from an elastic state to a highly nonlinear state, then experienced dynamic instability, and finally collapsed to the ground. The structural responses that have been monitored in the presented test include the specimen's dynamic properties, displacements, and accelerations. The data collected from this benchmark test program can be used for the verification of existing analytical and numerical simulation methods, especially for cases involving the large displacement and rotation or collapse process simulation of RC frame structures. It is observed from the test that: (1) the frame survived when the maximum story drift ratio and the residual drift ratio reached 12.51% and 9.60% respectively, indicating that the RC frame structure may have a much high ductility capacity; (2) the collapse of the 1 st, 2 nd, and 3 rd stories was due to failure of the plastic hinges at columns; and (3) during the collapse process, the collisions and the damage-induced local oscillation can generate very large horizontal and vertical acceleration responses. More specifically, the collapse of the 1 st story was the result of the failure of plastic hinges, caused by seismic excitation, while collapse of the 2 nd and 3 rd stories resulted from the combined results of plastic hinge failures and punching shear failures in the slab due to impact effects.