Mullite-based cellular ceramics obtained by a combination of direct foaming and reaction bonding. Issue 7 (August 2015)

• Record Type: Journal Article
• Authors: Konegger, Thomas; Felzmann, Ruth; Achleitner, Birgit; Brouczek, Dominik
• Is Part Of: Ceramics international. Volume 41:Issue 7(2015)
• Page Start: 8630
• Page End: 8636
• Publication Date: 2015-08
• Subjects: A. Precursors: organic -- A. Shaping -- B. Porosity -- D. Mullite; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2015.03.073
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: Mullite-based cellular ceramics were prepared via the polymer precursor route using poly(silsesquioxane) in combination with particulate alumina or alumina/aluminum mixtures. The multi-functional preceramic polymer was used as pore-forming agent by employing a self-foaming process during the polymer cross-linking step, as well as a precursor for reactive silica, one of the reagents in mullite formation. The size of filler particulates was found to strongly affect foaming of the polymer/filler mixtures, with coarser particles facilitating an improved foaming performance. Thermal conversion in air at 1600 °C resulted in the formation of cellular ceramics with high mullite contents. The partial substitution of alumina with aluminum in the initial mixtures resulted in improved mechanical properties at comparable porosities, resulting in compressive strengths of 0.3 MPa at total porosities of 93%. A correlation between thermal analysis data and crystalline phase development during the thermal treatment allowed for the clarification of processes taking place during heat treatment, yielding information for a future process optimization approaches.