Adsorption of malachite green and crystal violet cationic dyes from aqueous solution using pumice stone as a low-cost adsorbent: kinetic, equilibrium, and thermodynamic studies. Issue 27 (8th June 2016)

• Record Type: Journal Article
• Authors: Shayesteh, Hadi; Rahbar-Kelishami, Ahmad; Norouzbeigi, Reza
• Is Part Of: Desalination and water treatment. Volume 57:Issue 27(2016)
• Page Start: 12822
• Page End: 12831
• Publication Date: 2016-06-08
• Subjects: Pumice -- Malachite green -- Crystal violet -- Adsorption -- Kinetics -- Thermodynamics; Saline water conversion -- Periodicals; Saline water conversion; Water -- Purification; Periodicals; 628.167
• DOI: 10.1080/19443994.2015.1054315
• Languages: English
• ISSNs: 1944-3994

Abstract

Abstract: In this study, the sorption potential of pumice was investigated as geomaterial adsorbent for removal of two cationic dyes, malachite green (MG) and crystal violet (CV), from aqueous solution. In batch experiments, the effects of contact time, particle size, absorbent dose, solution pH, initial dye concentration, and temperature of MG and CV ions on the pumice adsorption capacity was studied. The characterization of the pumice has been accomplished by X-ray fluorescence spectroscopy, scanning electron microscope, and Brunauer–Emmett–Teller technologies. Equilibrium data were accurately fitted onto Langmuir, Freundlich, and Temkin isotherms. The results showed that the adsorption isotherm data were fitted well to the Langmuir isotherm and the maximum adsorption capacities calculated were 22.57 and 6.99 mg/g for MG and CV at 25°C, respectively. The kinetic data for both dyes were better described by the pseudo-second-order kinetic model. The thermodynamic parameters such as Δ G °, Δ H °, and Δ S ° were also evaluated. The positive Δ H ° and Δ S ° values described endothermic nature of the adsorption and the affinity of pumice for MG and CV adsorption, respectively. It is expected that pumice can be considered as a low-cost adsorbent for the removal of dyes from wastewater.