Effect of bed agglomeration by mineral component with different coal types. Issue 2 (May 2016)

• Record Type: Journal Article
• Authors: Namkung, Hueon; Kim, Chan-Ho; Kim, Dongju; Yuan, Xiangzhou; Kang, Tae-Jin; Kim, Hyung-Taek
• Is Part Of: Journal of the Energy Institute. Volume 89:Issue 2(2016:Apr.)
• Page Start: 172
• Page End: 181
• Publication Date: 2016-05
• Subjects: Bed agglomeration -- Gasification -- Mineral mapping -- Ash chemicals; Power (Mechanics) -- Periodicals; Power resources -- Periodicals; Fuel -- Periodicals; 621.04205
• DOI: 10.1016/j.joei.2015.02.006
• Languages: English
• ISSNs: 1743-9671

Abstract

Abstract: Bed agglomeration is a major operating problem in fluidized bed systems because the bed agglomeration phenomenon reduces the solid–gas interaction that increases the system efficiency. The bed deposit from a 3 ton/day transport reactor integrated gasifier (TRIG) system was analyzed with electron probe micro analyzer (EPMA) mapping to detect the chemical components in the bed deposit. The bed agglomeration tendency was assessed through a muffle furnace under different experimental conditions such as particle size, temperature, coal/sand mixing ratio, and fuel type. To prevent the bed agglomeration, some additives, such as kaolin and alumina, were used at different mixing ratios. Major mineral components for the formation of bed agglomeration are Fe, Ca, and Mg from EPMA. The bed agglomeration tendency increases with decreasing particle size and increasing temperature and coal/sand mixing ratio. The prevention effect of bed deposit increases with increasing input ratio of additives. Highlights: Chemicals of deposited clinker from a 3 ton/day TRIG system were analyzed with EPMA and SEM-EDX. The bed agglomeration tendencies were assessed by different reaction condition and additives. Bed agglomeration phenomenon is related to Fe, Ca, and Mg contents in ash.