A millimeter‐wave CMOS power amplifier design using high‐Q slow‐wave transmission lines. Issue 2 (29th September 2015)

• Record Type: Journal Article
• Authors: Tang, Xiao‐Lan; Pistono, Emmanuel; Ferrari, Philippe; Fournier, Jean‐Michel
• Is Part Of: International journal of RF and microwave computer-aided engineering. Volume 26:Issue 2(2016)
• Page Start: 99
• Page End: 109
• Publication Date: 2015-09-29
• Subjects: power amplifier -- slow‐wave transmission lines -- CMOS -- millimeter‐wave; Microwave devices -- Computer-aided design -- Periodicals; Computer-aided engineering -- Periodicals; 621.3813
• DOI: 10.1002/mmce.20943
• Languages: English
• ISSNs: 1096-4290

Abstract

ABSTRACT: A three‐stage 60‐GHz power amplifier (PA) has been implemented in a 65 nm Complementary Metal Oxide Semiconductor (CMOS) technology. High‐quality‐factor slow‐wave coplanar waveguides (S‐CPW) were used for input, output and inter‐stage matching networks to improve the performance. Being biased for Class‐A operation, the PA exhibits a measured power gain G of 18.3 dB at the working frequency, with a 3‐dB bandwidth of 8.5 GHz. The measured 1‐dB output compression point (OCP1dB ) and the maximum saturated output power P sat are 12 dBm and 14.2 dBm, respectively, with a DC power consumption of 156 mW under 1.2 V voltage supply. The measured peak power added efficiency PAE is 16%. The die area is 0.52 mm 2 (875 × 600 μm 2 ) including all the pads, whereas the effective area is only 0.24 mm 2 . In addition, the performance improvement of the PA in terms of G, OCP1dB, P sat, PAE and the figure of merit using S‐CPW instead of thin film microstrip have been demonstrated. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:99–109, 2016.