A comprehensive evaluation of different radiation models in a gas turbine combustor under conditions of oxy-fuel combustion with dry recycle. (March 2016)

• Record Type: Journal Article
• Authors: Kez, V.; Liu, F.; Consalvi, J.L.; Ströhle, J.; Epple, B.
• Is Part Of: Journal of quantitative spectroscopy & radiative transfer. Volume 172(2016:Mar.)
• Page Start: 121
• Page End: 133
• Publication Date: 2016-03
• Subjects: Oxy-fuel combustion -- Non-gray gas radiation models -- SNBCK -- WBCK -- FSCK -- WSGG; Spectrum analysis -- Periodicals; Radiation -- Periodicals; Analyse spectrale -- Périodiques; Rayonnement -- Périodiques; Radiation; Spectrum analysis; Periodicals; 543.0858
• DOI: 10.1016/j.jqsrt.2015.11.002
• Languages: English
• ISSNs: 0022-4073

Abstract

Abstract: The oxy-fuel combustion is a promising CO2 capture technology from combustion systems. This process is characterized by much higher CO2 concentrations in the combustion system compared to that of the conventional air-fuel combustion. To accurately predict the enhanced thermal radiation in oxy-fuel combustion, it is essential to take into account the non-gray nature of gas radiation. In this study, radiation heat transfer in a 3D model gas turbine combustor under two test cases at 20 atm total pressure was calculated by various non-gray gas radiation models, including the statistical narrow-band (SNB) model, the statistical narrow-band correlated-k (SNBCK) model, the wide-band correlated-k (WBCK) model, the full spectrum correlated-k (FSCK) model, and several weighted sum of gray gases (WSGG) models. Calculations of SNB, SNBCK, and FSCK were conducted using the updated EM2C SNB model parameters. Results of the SNB model are considered as the benchmark solution to evaluate the accuracy of the other models considered. Results of SNBCK and FSCK are in good agreement with the benchmark solution. The WBCK model is less accurate than SNBCK or FSCK. Considering the three formulations of the WBCK model, the multiple gases formulation is the best choice regarding the accuracy and computational cost. The WSGG model with the parameters of Bordbar et al. (2014)[20] is the most accurate of the three investigated WSGG models. Use of the gray WSSG formulation leads to significant deviations from the benchmark data and should not be applied to predict radiation heat transfer in oxy-fuel combustion systems. A best practice to incorporate the state-of-the-art gas radiation models for high accuracy of radiation heat transfer calculations at minimal increase in computational cost in CFD simulation of oxy-fuel combustion systems for pressure path lengths up to about 10 bar m is suggested. Highlights: SNB benchmark data are provided for two 3D oxy-fuel test cases with dry recycle. The accuracy of SNBCK, FSCK, WBCK and WSGG models is evaluated. SNBCK model has almost the same accuracy as the SNB model. FSCK model represents the best compromise between accuracy and efficiency. WBCK model have similar accuracy as that of the WSGG model using updated parameters.