Crumb rubber used in concrete to provide freeze–thaw protection (optimal particle size). (20th January 2016) - Richardson, Alan
Abstract: This research has examined the optimum particle size of crumb rubber, used as an additive to concrete that would provide maximum freeze–thaw protection whilst minimising the compressive strength loss. The crumb rubber as used in the paper was divided into five batches, with increasing particle size, graded in increments of 0.5 mm, from <0.5 to 2.5 mm. The primary properties of the concrete investigated were; air content, freeze–thaw durability and compressive strength. These were tested using standard test methods. The range of tests used was conclusive in that the <0.5 the crumb rubber particle size, provided the greater degree of air entrainment. The freeze–thaw cycle results suggested that crumb rubber provided freeze–thaw protection, as the plain concrete deteriorated compared to the concrete with crumb rubber additions. There was no definitive correlation between the compressive strength and the crumb rubber particles size, although the rubberised concrete had an average strength loss of 5.24% after 28 days. This research indicates that crumb rubber graded up to <0.5 mm is the optimum size to use, when crumb rubber granules are used to provide freeze–thaw protection in concrete. Highlights: This research confirms the efficacy of rubber crumb used as a freeze–thaw protection. The rubber crumb selection as used has identified the most effective particle size. Rubber crumb use provides a use for waste and reduces the problem of tyre disposal. The use of a waste product enhances the performance of the concrete. The rubber crumb usage reduces the life cycle cost of a building/structure.